ILCA / Laser Parts

Complete lower mast section for the ILCA 6 dinghy. Also called the bottom section, this lower mast includes gooseneck fitting and plastic mast base. Also compatible with existing Laser Radial rigs. Complete assembly Lower Mast / Bottom...

Complete lower mast section for the ILCA 4 dinghy. This section has a pre-bend to achieve great sail shape for the smaller ILCA 4 sail. Includes gooseneck fitting and plastic mast base. Also compatible with existing Laser 4.7 rigs. Complete lower mast...

Integrated large and small ILCA traveler block from Harken with ball bearings for great performance. Replaces the standard 'traveler block large' and 'traveler block small' which are connected with a sister clip to reduce the space between the blocks and...

Complete batten set for ILCA 4 and ILCA 6 sails. Includes three battens with end caps. Compatible with existing Laser 4.7, Laser Radial, and Laser Standard (MK1) sails. This batten set will not work with ILCA 7  Last Standard MK2 sails. Class...

Help keep your Laser / ILCA daggerboard in place with the original M brake. This M shaped (or W, depending on your perspective) rubber piece is mounted to the deck just aft of the daggerboard trunk and designed to make light contact with the daggerboard...

This complete rudder assembly fits all model year Laser and ILCA sailboats and it is class legal for racing. In 2010, the blade was upgraded from foam core construction to a much more durable fiberglass 'resin infused' material that outlasts and...

Introducing the EPIC Traveler, the ultimate traveler line for Laser and ILCA sailboats. An upgraded version of our popular Vectran Traveler, the EPIC Traveler is made from New England Ropes W2R, a line that is designed as a wire rope replacement. Its...

The Laser / ILCA Outhaul Mast Loop w/ Block (Single Block) features a single Harken T18 block spliced to Dyneema with an eye in the other end. Simply wrap the line around the mast and past the block through the eye - easy to use whether the sail is up or...

The drain bushing assembly easily installs into all model year ILCA and Laser sailboats to enable an autobailer to be fitted. Brass fittings Simple install Housing for Auto-bailer assembly Works on ILCA and Laser sailboats Zim Sailing Part...

Custom Spliced 6:1 Cunningham w/ Technora Control Line for Laser/ILCA Upgrade your Laser / ILCA cunningham control to a 6:1 purchase system with this complete set up from our Rig Shop. Our 6:1 cunningham uses a set of two Harken 29mm T2 carbo blocks to...

Base plug for the bottom of the ILCA 6 / Laser Radial Composite Lower Mast Section. This plug is specific for the composite lower and not designed for the aluminum lower mast section.  Base Plug ILCA 6 Composite Lower Other Base Plugs: ILCA...

Use this Outhaul Strop if you are rigging a Laser 4.7 / ILCA 4 rig with our 6:1 Outhaul PRO setup. This strop is made from Dyneema with spliced loops at each end so that you can extend the primary line on the outhaul to accommodate the shorter foot...

The Laser / ILCA Outhaul Mast Loop w/ Block (Double Block) features two Harken T18 block spliced to Dyneema with an eye in the other end. Simply wrap the line around the mast and past the blocks through the eye - easy to use whether the sail is up or...

Updated Laser / ILCA Clew Inhauler from the West Coast Sailing Rig Shop. The ultimate easy on/off clew inhaul solution features a closed loop for luggage tagging on your boom cleat and a loop and stopper ball closure. After connecting the loop to your...

This Laser / ILCA class legal set up is the best way to control your daggerboard. Easy on/off attachment to the blade with an ultra-lightweight snap shackle. Eliminates daggerboard creep with sailing upwind by applying maximum pressure vertically rather...

Complete race spec Cunningham and Outhaul Kit for ILCA dinghes. Assembled using top end Harken hardware, the kit includes new, lightweight Harken airblocks, Dynemma SK78 primary lines, and Dinghy Control secondary lines. Cunningham is rigged as a cascade...