Mast & Boom

Forestay wire for Club 420 and Vanguard 15 sailboats. Designed to work with all C420s from Zim and LaserPerformance and all Vanguard 15s from Vanguard and LaserPerformance.  Heavy duty 3/32 inch diameter stainless wire Approximately 14 foot 6...

Modeled after the standard wire jib halyard that comes with the Club 420, we use high quality 7x19 wire and nicropress a Harken Micro Single with Becket to the 'working' end. For attachment to the sail, we upgrade the standard shackle to a Wichard...

The wire lanyard features plastic covered stainless wire with loops on either end. Great for holding tack fast pins on either the main or the jib of your 420 or FJ. A great option to avoid pins being lost during rigging. 

Club/School version of the C420 / FJ spinnaker pole. This version is non-tapered and floating. Perfect for practice or program use. Oversize Shipping Information This item is considered oversize due to length and/or weight and not eligible for standard...

No more guy hooks! 1/4 inch roller pin designed to fit into Zim, LP, and Vanguard C420 shroud adjusters. Built exclusively by Zim Sailing.  Pin Only. Should adjuster in images shown for reference. Stainless Steel Construction.

C420 boom by Selden. This is the most recent class approved racing spec and preferred by many top sailors. Freight Shipping Information This item is classified as FREIGHT due to weight and/or length and is therefore not eligible for free shipping. For...

The C420 Link Plate Shroud is an exclusive product designed by Zim Sailing. The end is designed to accept our link plate, which allows you to adjust your rig while keeping the shroud captive, increasing safety and performance. This shroud can be used to...

The long C420 Shroud Adjuster Cover is designed for use with Zim Sailing's C420 shroud link plates. Sold individually. 

Protect your shroud adjuster and prevent cuts and scrapes. These covers prevent jib sheets from catching on pins and makes changing settings on the water easier. Can also be used on your jib halyard shackle to keep the spinnaker from snagging on sharp...

This is a 5mm x 25mm ring made from high quality stainless steel. It is commonly used as the Main Halyard ring on the Club 420 and FJ sailboats, as well as the bridle ring on Optimist sailboats.  Similar to EX1362. 

Stainless Steel shroud adjuster from Zim Sailing for 420, FJ, V-15, and similar small sailboats. Has a 3/16 inch adjustment increment with two rows of holes. Use a 1/4 inch pin on the bottom and a 3/16 inch pin to connect your shroud (not included). Zim...

This fast pin is used to attach the tack of the main sail to the boom on boats like the C420, FJ, and Vanguard 15. Can also be used on other boats or other applications.  Pin Only Stainless Steel construction Secure Under Load Easily Secures 1/4...

The mast heave sheave allows the main halyard to run smoothly through the mast head. It spins enabling the halyard to be adjusted easily. White Plastic Works on 420, FJ, and V-15 sailboats Zim Part # 20262 / Laser Performance Part # 90579 Compatible...

These spreader airfoils are aerodynamically shaped to hold the shrouds. Sold in a set of 2 spreaders and designed for both Club 420 and FJ masts. 16 inch long Aluminum construction Works on both Club 420 and FJ masts for LP and Zim boats Sold as a set...

This shackle is used primarily to attach jib halyard to head of jib sail on 420, FJ, and V15. Supplied by Zim Sailing. Captive locking pin Easy twist and release Part Number 20030 Previous LP Part Number 90570 One Design...

This is a trapeze cleat for a spinnaker and trapeze rigged 420. The integrated block allows for additional purchase. This cleat provides a quick and solid lock that is easy to release, making it the preferred choice for adjusting trapeze lines. ...