Mast & Boom

The shroud adjuster allows shroud tension to be adjusted by moving the pins up or down on 420, FJ, or V15. Commonly used on Vanguard, LaserPerformance, and Zim sailboats. Multiple Holes for Adjusting 1/4 inch Holes Part Number 90583 Sold...

The hounds bracket is the mount for the forestay, jib halyard, and tangs which hold the shrouds. The bracket is riveted to the mast of Club 420, FJ, and V-15 sailboats. Clevis pins and ring dings included Sold without shroud tangs Stainless Steel Zim...

These fittings attach to each end of a spinnaker/whisker pole. Fits standard 420 and FJ spin poles with 1 inch diameter. Fits most 1 inch outer diameter poles. Includes Metal jaw w/spring. inside Diameter: .9 inches. Zim Part # 20183 / Laser Performance...

This shackle is primarily used to attach the jib halyard block to the mast hounds assembly. Includes Clevis Pin and Ring

This heavy duty bail is riveted to the boom in three different locations and is used for attachment points for boom blocks and the vang on 420, FJ, and V15. Heavy Duty Large diameter Zim Part # 20214 / Laser Performance Part # 90409  

Standard 1/8 inch diameter shroud for Club 420 sailboats. Original equipment on new boats and a replacement for existing shrouds on Zim and LaserPerformance boats. Stainless steel 1/8 inch wire Approximately 13' 5" long Class legal for Club 420...

This stainless steel stamped shackle has a clevis pin and split ring keeper for greater security. Includes clevis Pin with split Ring Breaking Strength 2500 Pounds Working Load 1250 Pounds 1/2 inch Width x inch 7/16 Length 3/16 inch diameter pin w/...

Tapered spinnaker pole for Club 420 & Club FJ. Rigged with fittings, ready to sail. Tapers from 38mm to 25mm at each end for maximum stiffness in the area of maximum load, but minimum overall weight. Pole has a center eyestrap and is setup for...

This plug fits the bottom of all FJ, Club 420, and V-15 mast bases to mate with mast step, which is installed to the deck. Original equipment on new Club 420, FJ, and V-15 sailboats. Zim Part # 20129 / Laser Performance Part # 90559 Compatible with both...

Complete assembly for shrouds and jib halyard block attachment on Club 420, FJ, and V-15 sailboats. Includes tangs for both shrouds Includes bolt and nut to attach to mast Stainless steel construction Zim Part # 20128 / Laser Performance Part # 90510...

Forestay wire for Club 420 sailboats from Zim and Laser Performance. This stainless steel forestay supports the mast from the bow. 3/32 inch diameter Approximately 14 foot 6 inches long Fits Club 420 sailboats from Zim and LaserPerformance Zim Part #...

The Gooseneck Universal connects the boom end and mast end fittings on all Club 420, FJ, and V-15 sailboats. Square fitting with offset holes for connecting gooseneck assembly between boom and mast. 3/8 inch holes match standard gooseneck fitting...

The twist shackle allows for blocks and other equipment to be properly aligned when attached. 90 degree twist allows for proper alignment Used primarily on vang assemblies

This is a round plastic "donut" trapeze handle for any trapeze boat. Plastic fitting. Zim Part # 20064 / Laser Performance Part # 90601 Compatible with both Zim and Laser Performance boats

This is a 16:1 boom vang for club 420 sailboats, complete with shackles on each end for attachment. Add your existing control line (rigging up through the centerboard trunk) to complete the vang setup.  Club 420 Boom vang 3mm Spectra Line for low...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes.. Sheave: 22 mm / 7/8 in Length: 60 mm / 2 3/8 in Weight: 28 g / 1 oz Shackle pin: 4 mm / 5/32...