The boom block with becket is attached to the aft end of the ILCA boom. Pass your mainsheet through the block, down to the traveler block, and back up to secure to the becket. A great upgrade for an older boat, particularly for light air sailing!...

The standard boom block is mounted to the mid point of the ILCA boom. Pass your mainsheet up from your mainsheet block, through the boom block, and then aft to the boom block with becket to complete your rigging. Attaches to the boom with the stainless...

Integrated large and small ILCA traveler block from Allen with ball bearings for great performance. Replaces the standard 'traveler block large' and 'traveler block small' which are connected with a sister clip to reduce the space between the blocks and...

Replacement gudgeon for the ILCA dinghy and Laser sailboat. Two of these are mounted on the transom of the boat and used for attaching the rudder head. Installs with 4 screws (not included). Sold individually and made from a heavy duty plastic for long...

Complete autobailer assembly for the ILCA dinghy with bailer plate, chute door, bung, and screw. This is a class legal bailer with ILCA stamp on body of the bailer, and found on new production boats. Designed to be a direct replacement part for existing...

Complete Deck Cleat Plate assembly with Harken cleats and fairleads. Attaches to the ILCA dinghy deck with two screws and used for cleating your outhaul and cunningham lines that run back from the deck blocks mounted behind the mast.

The deck blocks plate is mounted just aft of the ILCA mast step and is a mounting point for two turning blocks for your outhaul and cunningham lines. This is the complete deck blocks plate assembly includes two Harken 16mm air blocks and is standard on...

The deck blocks plate is mounted just aft of the ILCA mast step and is a mounting point for two turning blocks for your outhaul and cunningham lines. This is the plate only, handly for replacing an old plate or for upgrading with your own favorite blocks.

Standard aluminum fairlead for the ILCA dinghy traveler. Attach one on each side of the transom deck.

The Bow Eye Fairlead is mounted on the bow of the ILCA dinghy and serves as a tie down point or place to attach your daggerboard retaining line.

Integrated large and small ILCA traveler block from Harken with ball bearings for great performance. Replaces the standard 'traveler block large' and 'traveler block small' which are connected with a sister clip to reduce the space between the blocks and...

Help keep your Laser / ILCA daggerboard in place with the original M brake. This M shaped (or W, depending on your perspective) rubber piece is mounted to the deck just aft of the daggerboard trunk and designed to make light contact with the daggerboard...

These screw caps cover the screws that secure the Laser / ILCA traveler fairleads. This prevents the sharp end of the screw from being exposed. Self tapping Plastic fitting Sold Individually

The ZhikGrip II straps are designed to connect and lock with the Zhik boot range. Together they provide the best connection to your boats dynamics, allowing you to hike hard for longer, while keeping your foot relaxed. Using highly durable Nylon and...

Laser Hiking Strap by Rooster Sailing. Features a SureGrip textured rubber underside that enables you to hike out using the end of the toes and not loose your footing or grip. Hiking Strap for the Laser sailboat. SureGrip underside for great contact...

The drain bushing assembly easily installs into all model year ILCA and Laser sailboats to enable an autobailer to be fitted. Brass fittings Simple install Housing for Auto-bailer assembly Works on ILCA and Laser sailboats Zim Sailing Part...