Upgrade your J/105 spinnaker trimming with the 3 Piece Spin Sheet Set from the West Coast Sailing Rig Shop. This complete sheet set includes 2 matching sheets with a Dyneema strop. The sheets are made from 8mm Marlow D2 Race with a total working...

Custom Spliced Laser/ILCA Vang Assembly with Technora Line & Allen XHL Vang Block Upgrade your Laser / ILCA with this complete, ready to sail vang assembly from the West Coast Sailing Rig Shop. This is our top tier vang assembly with upgrade to the...

Custom Spliced Laser/ILCA 6:1 Outhaul Assembly w/ Technora Control Line & Harken Blocks Upgrade your Laser / ILCA outhaul to the latest 6:1 purchase system with this complete set up from our Rig Shop. This is our updated 'Aft Loop' quick release...

Class legal racing sail for the ILCA 6. Made from a heavy weight 3.8 oz Dacron for long sailing life and comes folded. Includes sail bag and free sail numbers/installation. Designed to work with the ILCA 6 lower mast section (composite or aluminum). The...

Find out why these extensions are used by top Laser sailors around the world. Pair with a Rooster Carbon Laser Tiller for the ultimate Laser tiller and extension set up. 49" Length - Available in 19mm, 22mm, and 25mm DiametersThe Rooster Carbon Tiller...

Tasar Jib sail made out of Mylar. The jib has 38.42 sq. ft., 3.57 sq. m. of sail area. Class legal Tasar class Jib 38.42 sq. ft., 3.57 sq. m.

Mylar Mainsail for the Tasar sailboat. Class approved for racing and latest class specification. Sail Area: 89.44 sq ft., 8.31 sq. m. Includes Sailbag and Mylar repair kit. Oversize Shipping Information This item is considered oversize due to...

Class approved ILCA lower vang unit from Ronstan.  Lowest friction ILCA vang unit available. HHL sheave for the high load primary sheave. Easy cleating and releasing from any angle. Pivot point close to clevis pin attachment to minimize...

Custom Spliced 10:1 Cunningham w/ Technora Control Line for Laser/ILCA Maximize the cunningham control on your iLCA 7 with this custom 10:1 cunningham system from West Coast Sailing. This system provides the maximum purchase allowed under class rules...

Custom Spliced Laser/ILCA Vang Assembly with Ronstan Vang Block, Ronstan Hardware, and Technora Line Upgrade your Laser / ILCA with this complete, ready to sail vang assembly from the West Coast Sailing Rig Shop. This assembly uses all Ronstan hardware...

Custom Spliced 8:1 Cunningham w/ Technora Control Line for Laser/ILCA Upgrade your Laser / ILCA cunningham control to the latest 8:1 purchase system with this complete set up from our Rig Shop. Our TecPRO 8:1 cunningham uses a set of three Harken T2...

Upgrade your J/80 sailboat with a new Main Halyard from the West Coast Sailing Rig Shop. This option features 8mm Marlow D2 Race, a high-strength, lightweight all-round performance line with Dyneema core and a 24 plait braided polyester cover...

Up your J/70 rigging game with our Backstay Flicker, which keeps your backstay clear of  main sail battens when sail crosses in tacks and gybes. We build these in house, starting with a powder coated epoxy backstay flicker from RBS and then add...

This is a high performance main halyard line for the Thistle sailboat. Developed in coordination with Thistle class experts, this tapered version is a performance upgrade of our standard halyard.  Featuring a taper/bury on both ends for less weight...

This is a high performance continuous and tapered spinnaker sheet for the Thistle sailboat. Developed in coordination with Thistle class experts, this is a continuous sheet, with the center running through the boat and the ends attached to the sail,...

Our Melges 24 Main Halyard is made with 5mm Vectrus 12 (vectran) for the primary halyard section that is eye-to-eye spliced with 5mm Amsteel Blue (dyneema) for the hoisting tail. We build this halyard to just the right length for attaching your 4:1 fine...