Hull & Deck

Large washer for the Club 420 centerboard pivot bolt. 3/8 inch hole x 2 inch diameter. Standard on all Zim C420 sailboats.

Upper pintle for Zim Sailing 420s and FJs with over-the-transom-rudders.  Stainless Steel 2 Hole Mounting Hole Spacing: 2 inch Hole Size: 1/4 inch Zim Part # 20032

Lower pintle for Zim Sailing 420s and FJs with over-the-transom-rudders.  Stainless Steel 2 Hole Mounting Hole Spacing: 2 inch Hole Size: 1/4 inch Zim Part # 20031

Replacement black mesh spinnaker bag for the Club 420 and Club FJ sailboats. Features a wide opening with support shockcord for easy dousing and launching along with a handy velcro pocket. Heavy duty mesh construction Compatible with Club 420 and Club...

Complete screw-in drain plug assembly by Holt Allen. Screw-in plug Housing screw hole spacing: 38mm / 1.5 inch Plug hole diameter: 22mm / 0.88 inch Includes housing and plug Color: Black Manufacturer: Allen Part Number: A.423 Some use...

This is a standard bow shackle used commonly on the 420, FJ & V15 and as a mast bail on 3:1 purchase 420 vangs. It is an excellent shackle for all-around use with screw pin included. HAR 2110 1/4 inch / 6mm diameter screw pin for easy...

This one piece molded bow bumper is superb for schools and programs looking to prevent damage to boats. This is the size used with Junior Race Version FJs. One piece soft plastic construction

This strong alloy clam ('jam') cleat is perfect for a variety of applications from halyards to travelers to control lines. Integrated fairlead guides line into cleat Mounts easily to flat or curved surfaces Suitable for use with 3mm to 6mm lines...

Pintles are mounted to the transom to accept the gudgeon from a rudder assembly. Use this pintle in the lower position on either FJ or C420 sailboats from Vanguard, LaserPerformance, or Zim Sailing that have a 4 hole mounting pattern. 4 Hole...

Standard drain plug fitting from Beckson. Complete assembly with screw-in plug and housing, with 1 inch plug hole diameter and 1.5 inch mounting hole spacing for drain plug housing. Plastic keeper helps prevent the plug from falling out of the housing...

This is a pair of 420 centerboard gasket material. Enough to do both sides of the centerboard case. Durable fabric Pair of two Length: 47" Width 1.25" Zim Part # 20354 / Laser Performance Part # 85045 Compatible with both Zim and Laser Performance boats

This one piece molded bow bumper is superb for schools and programs looking to prevent damage to boats. This is the size used with School/Collegiate Version FJs. One piece soft plastic construction

Complete assembly to replace the pivot bolt, nut and washers for the centerboard on an LP or ZIM C420 or FJ. Stainless steel fittings Includes rubber washers FJ and 420 Zim Part # 20271 / Laser Performance Part # 85016  

This spinnaker guy hook is bolted through the rail and includes a small plastic 'gate' to prevent accidental catching. Used on most boats before 2004 Stainless steel fitting

Bow Chainplate compatible with all 420, FJ, and V-15 sailboats.. Made of aluminum, hard anodized charcoal grey. Three countersunk mounting holes for 1/4" flat head fasteners. Three 1/4" through holes for painter, forestay, and jib tack. Compatible with...

Metal hiking strap plate for 420, FJ and Sunfish. Allows the secure attachment of the hiking straps to the boat. Stainless Steel Zim Part # 20015 / Laser Performance Part # 91131 Compatible with both Zim and Laser Performance boats