Complete jib halyard block assembly for the Hobie 16 from Home Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Replacement shroud for Hobie 16 and Hobie 17 sailboats. Use on port or starboard. Shroud wire with black vinyl covering. Replacement for Hobie 16 and Hobie 17 sailboats. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop...

This is a forestay for those Hobie 16s using the Aussie jib halyard system. This replaces the forestay wire found in the Aussie upgrade kit, or can be used to upgrade your jib halyard system. Use with Hobie 16 Aussie Jib Halyard system. Measured at 225...

1/4 inch diameter clevis pin with a 1/2 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 1/4 in (6.5 mm) Pin Grip Length (B) is 1/2 in (12.5...

Replacement bridle wire for the Hobie Wave with black vinyl covering. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Stainless steel halyard shackle used on many Hobie Cat sailboats. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

5/16 inch stainless steel bow shackle from Hobie Cat. Please note that this shackle does not include a mouse hole.  RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

This is a 10 hole adjuster used on the Hobie 16 forestay,but can be used for many boats that require the extension of a shroud or wire. The holes are 1/4 inch diameter. 10 hole shroud adjuster commonly used on Hobie 16 forestay. 6-3/8 inch pin to pin...

Standard jib halyard block found on many Hobie Cat sailboats. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Standard 6.4 mm bow shackle from Hobie Cat with 1/4 inch diameter pin. 6.4 mm length bow shackle. 1/4 inch diameter pin. Stainless steel construction by Hobie Cat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop...

Standard 7 hole shroud adjuster used on a variety of Hobie Cat shroud and forestay assemblies to connect wire to deck. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Large size Clevis Ring from Hobie Cat. Works with most clevis pins. Large size stainless steel clevis ring for most clevis pins. Hobie Cat # 20860000.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat...

The 10 hole forestay adjuster mades dialing in the rake of your Hobie Cat mast easy. Works on all Hobie Cat catamarans that that allow mast rake, such as the Hobie 14, Hobie 16, Hobie 17, and Hobie 18.   RESOURCES & SUPPORT Hobie Cat Parts...

1/4 inch diameter clevis pin with a 5/8 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 1/4 in (6.5 mm) Pin Grip Length (B) is 5/8 in (16 mm) Sold...

A small stainless steel cotter pin with a 3/32 inch diameter and 3/4 inch length for a variety of applications. 3/32 inch diameter. 3/4 inch length. Stainless steel.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop...

Secure your Hobie shroud to the anchor correctly with this shroud twist shackle, which has a 90 degree offset for a great fit. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts