Hobie Wave luff track.Oversize Shipping Information This item is considered oversize due to length and/or weight and not eligible for standard shipping. Oversize ground shipping is available to...

Large size Clevis Ring from Hobie Cat. Works with most clevis pins. Large size stainless steel clevis ring for most clevis pins. Hobie Cat # 20860000.   RESOURCES & SUPPORT

Stainless Detent style pin with captive ball at one end and ring at the other. 2 inch length by 1/4 inch diameter. Commonly used for the Hobie Wave mast step pin. Stainless steel Detent style pin 2...

This mast horn cleat is a replacement for the downhaul or halyard cleat on both the Hobie 14 and Hobie 16. Attach with rivets or screws (not included). Replacement downhaul or halyard cleat...

1/4 inch diameter clevis pin with a 1/2 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is...

Mast float bracket for the Hobie Wave. RESOURCES & SUPPORT Hobie Cat Parts Locators

A rivet cap is used to prevent leaking through the center of rivet. It is also used to replace rivets in worn, oversized holes, as in Hobie castings and sidebars. Works with rivets up to 3/16 inch...

Square top stainless steel 10-32 nut from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators

This lock ring measures 5/16" in diameter and is used to secure the 3/16" diameter clevis pin that is used on Hobie drives to retain the fins (prior to Kick Up drives).   RESOURCES &...

Standard 7 hole shroud adjuster used on a variety of Hobie Cat shroud and forestay assemblies to connect wire to deck. RESOURCES & SUPPORT Hobie Cat Parts Locators

Replacement mast head for Hobie Wave and Hobie 14 comptip style masts. Part Number 10602111 RESOURCES & SUPPORT Hobie Cat Parts Locators

Comptip for the Hobie Wave mast. RESOURCES & SUPPORT Hobie Cat Parts Locators

1/4 inch diameter clevis pin with a 5/8 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 1/4...

Replacement mast base casting for Hobie Wave sailboats. This is the current version found on all new boats. RESOURCES & SUPPORT Hobie Cat Parts Locators

The Hobie Baby Bob mast float is standard on Wave and can be installed on H14 and H16 (with comptip mast heads) with the included hardware. Retro fit to other dinghies. Designed by the Hobie Cat team...

3/16 inch diameter by 1/4 inch length pop rivet from Hobie Cat. 3/16 inch diameter. 1/4 inch length.   RESOURCES & SUPPORT