1/4 inch diameter clevis pin with a 1/2 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 1/4 in (6.5 mm) Pin Grip Length (B) is 1/2 in (12.5...

Standard rigging thimble found on many Hobie sailboats including the Hobie 16, Hobie 14, Hobie 17, and Hobie 18 in various wire rigging applications. Referred to as a 1/8 inch thimble, the actual eye of the thimble is larger to accommodate a larger...

1/8 inch nicopress sleeve from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

This is a 10 hole adjuster used on the Hobie 16 forestay,but can be used for many boats that require the extension of a shroud or wire. The holes are 1/4 inch diameter. 10 hole shroud adjuster commonly used on Hobie 16 forestay. 6-3/8 inch pin to pin...

Standard 6.4 mm bow shackle from Hobie Cat with 1/4 inch diameter pin. 6.4 mm length bow shackle. 1/4 inch diameter pin. Stainless steel construction by Hobie Cat.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop...

Standard 7 hole shroud adjuster used on a variety of Hobie Cat shroud and forestay assemblies to connect wire to deck. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Hobie 14 bridle wire with black vinyl covering. Use with Turbo upgrade. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Large size Clevis Ring from Hobie Cat. Works with most clevis pins. Large size stainless steel clevis ring for most clevis pins. Hobie Cat # 20860000.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat...

The 10 hole forestay adjuster mades dialing in the rake of your Hobie Cat mast easy. Works on all Hobie Cat catamarans that that allow mast rake, such as the Hobie 14, Hobie 16, Hobie 17, and Hobie 18.   RESOURCES & SUPPORT Hobie Cat Parts...

4.7 mm bow shackle from Hobie Cat with pin.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

1/4 inch diameter clevis pin with a 5/8 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 1/4 in (6.5 mm) Pin Grip Length (B) is 5/8 in (16 mm) Sold...

Secure your Hobie shroud to the anchor correctly with this shroud twist shackle, which has a 90 degree offset for a great fit. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Highest quality aircraft stainless wire coated with UV tolerant black or white vinyl coating for all of Hobie's wire products. Molded nylon handles are installed at the right place for easy in and out maneuvering. A pair of black coated wires for the...

Support wire for the Hobie 14 turbo jib kit block.  Length: 79-3/4 inches *Note that the Hobie has lengthened the wire slightly, and it is now rigged to be loose. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All...

Upper forestay for the Hobie 14. Part of the Turbo Jib assembly. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Highest quality aircraft stainless wire coated with UV tolerant black or white vinyl coating for all of Hobie's wire products. Molded nylon handles are installed at the right place for easy in and out maneuvering. A pair of black coated wires for the...