Package of replacement o rings for the Laser Autobailer Assembly. These rings are attached to the "chute" door, which is opened and closed using the bung and rod through the cockpit pushing. Class legal for ILCA racing Package of 10 replacement o rings...

Autobailer springs for ILCA / Laser autobailer assemblies. Replace the old o-rings with more reliable and longer lasting purpose-built springs. Stainless Steel Port and Starboard Class legal Easy to install Made by C-Vane

The Ultimate Bailer Lever from Sorensen™ – That’s right this isn’t a spring, it’s a lever, it will never wear out and it will be the Last Replacement You’ll Ever Need Tired of replacing worn-out bailer parts? Say...

Hike hard for longer with our highly durable Nylon and Rubber constructed ILCA / Laser dinghy strap. Lock into the dynamics of your boat with great grip at any angle or position. Position - skipper Length - 810mm Width - 80mm End 1 - loop End 2 -...

The ILCA Daggerboard Friction Pad MK2 is screwed to the back of your Daggerboard casing and allows for perfect grip and slip ratio when raising the board. The New and Improved design lets you replace the Rubber Pad housed inside the Plastic Casing...

Nylon wear protection pads for the Laser / ILCA dinghy. Designed to stop the mainsheet blocks from damaging the deck of the boat. The wear protectors clip around the traveler fairlead and are held in place by friction and the traveler rope. There is no...

This aluminum Clam Cleat includes a becket that holds the end of the rope under the cleat to allow rigging with a 2:1 advantage. Becket also holds shockcord & bungee.  No need for extra parts. Ideal for Cunningham adjustment on small boats, or...

Stainless steel bailer springs for the Laser® and ILCA® autobailer. A durable replacement for the rubber o-rings. Improved design for smooth opening and closure of the bailer chute.

Replacement traveler block for ILCA sailboats. The small size traveler block connects to the large size trabeler block with integrated sister clips. This is the 'traveler' side of the set up. Pass your traveler line from one end of the transom, through...

Replacement traveler block for ILCA sailboats. The large size traveler block connects to the small size traveler block with integrated sister clips. This is the 'mainsheet side' of the traveler set up and is mounted at the top. Pass your mainsheet down...

The hiking strap plate is a small, flat plastic plate that is mounted over your hiking strap. Installed just forward of the cockpit wall and behind the mainsheet eyestrap. Can be used on any Laser sailboat or ILCA dinghy.

Padded hiking strap for ILCA sailboats from Hyde. 

Complete screw-in drain plug assembly by Holt Allen. Screw-in plug Housing screw hole spacing: 38mm / 1.5 inch Plug hole diameter: 22mm / 0.88 inch Includes housing and plug Color: Black Manufacturer: Allen Part Number: A.423 Some use...

This is a replacement plastic grab rail as commonly found on the ILCA, Byte, Megabyte, and other small singlehanded dinghies. This is a three piece design that snaps together before installation. Designed for Zim Sailing sourced ILCA sailboats...

This strong alloy clam ('jam') cleat is perfect for a variety of applications from halyards to travelers to control lines. Integrated fairlead guides line into cleat Mounts easily to flat or curved surfaces Suitable for use with 3mm to 6mm lines...

Standard drain plug fitting from Beckson. Complete assembly with screw-in plug and housing, with 1 inch plug hole diameter and 1.5 inch mounting hole spacing for drain plug housing. Plastic keeper helps prevent the plug from falling out of the housing...