The Laser Bow Rail Guard is a simple accessory to keep this vulnerable part of the boat protected from common scratches and dings. It is molded with a high-grade rubber compound so you can be sure it is tough and long lasting. This bow bumper can be...

Perfect for spinnaker sheet turning blocks. This Ronstan block is free wheeling at low wind velocity. As the wind velocity increases the pressure on the sheave automatically engages the ratchet. The sheet rope is never trapped in the sheave and can slide...

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race. Sheave 16 mm / 5/8 in Length: 54 mm / 2 1/8...

Harken soft-attach Fly blocks are designed to provide strength without mass, providing sailors with big power in a low-aero package. Designed specifically for high-tech line, these efficient blocks have an incredible working load for their small size...

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. On/off switch operates from both sides. Standard grip: medium/light air; 10:1 holding power. Sheave: 57 mm / 2 1/4...

The Frederiksen ratchet block is legendary. It is light and very strong for optimal performance. The ratchet has a small distance between each click to enhance control of sheets. This is the ideal Laser mainsheet block. From Ronstan: The patented...

High-Quality Dolly Designed for Laser / ILCA Sailboats Dynamic Dollies makes launching, retrieving, moving, and storing your ILCA or Laser sailboat a breeze. This dolly is designed specifically for your boat so you can be sure of a great fit. Aluminum...

This traveler for Laser and ILCA sailboats is made of extremely strong, zero stretch Vectran for the tightest leech tension possible. The line is brummel spliced at the load bearing point to eliminate bulk underneath the tiller and keeping it class legal...

Laser vang control line pre cut from Excel Racing line. This line has a spectra core with polyester cover for great grip in the vang cleat and substantial holding power.  Designed to work with the Harken and/or Holt Alen 16:1 racing boom vang...

Laser cunningham control line has a spectra core with polyester cover for great grip in the the deck cleat and substantial holding power. Desiged for use on 'race' or 'upgraded' rig Laser sailboats with the upgraded deck blocks and cleat set up. Line:...

Laser outhaul control line for boats with upgraded outhaul/cunningham system. Long enough to run from cockpit, through deck cleat and blocks, up mast and back down length of boom through your purchase system. Line: 4mm Marlow Excel Racing Length: 18...

The Laser vang spectra line, or vang secondary, is used in the top part of the Laser vang system on the upgraded 15:1 Harken and Holt vany assemblies. Line: 3mm Spectra Length: 5 feet

The Laser cunningham spectra line, or cunningham secondary, is used on the top part of a racing cunningham system and passes through the grommet in the sail. Intended for use on Laser sailboats with 'race' or 'upgraded' hardware including deck blocks and...

Spectra portion of the upgraded Laser outhaul set up. This section is used at the aft end of the boom. Pre cut to our recommended length for easy upgrade or replacement. Line: 3mm Spectra Length: 10 feet  

Vang Line for classic rigged Lasers (basic 3:1 purchase system), pre cut to our recommened length of 10 feet. Line: 5mm Robline Sirius 500 Length: 10 Feet (Quantity 1 = 10 foot length) Typically cut from red/silver spool, but exact color may vary ...

Laser cunningham line for classic rigged boats with origional deck hardware. Pre cut to the recommended 10 foot length for easy upgrade or replacement on your Laser sailboat. Line: 5mm Robline Sirius Length: 10 feet (Quantity 1 = 10 foot section of...