Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.
- Aluminum construction
- Works with line diameters ranging 3mm-12mm
- Max working load of 300 lbs
| Material | Aluminum |
| Minimum Line Diameter | 1/8 inch / 3mm |
| Maximum Line Diameter | 1/2 inch / 12mm |
| Fastener Spacing | 1-1/2 inch / 38mm |
| Required Fasteners | #10 FH inch / 5mm FH |
| Height | 1-3/16 inch / 30mm |
| Length | 2-9/16 inch / 65mm |
| Width | 1-1/4 inch / 32mm |
| Max Working Load | 300 lbs / 196 kg |
| Breaking Load | 750 lbs / 340 kg |
ONE DESIGN APPLICATIONS
This fitting is commonly used and/or recommended for the following one design sailboat applications:
- Etchells Forward Cockpit Coaming Cam Cleats (x7)
- Flying Scot Spinnaker Sheet Gunwale Cams (x2)
- J105 Traveler Cleat (x2)
- Lightning Jib Sheet Cam Cleat (x2)
- Melges 24 Cam Cleat (x1)
- Snipe Downhaul Cam Cleat (x1)
- Sonar Main Traveler Cleat (x2)
- Thistle Jib Sheet Cam (x2)
- Viper 640 Jib Cleat (x2)
- VX One Jib Cleat (x1)
