Halyard Bag for the RS Feva sailboat.

The standard boom block is mounted to the mid point of the ILCA boom. Pass your mainsheet up from your mainsheet block, through the boom block, and then aft to the boom block with becket to complete your rigging. Attaches to the boom with the stainless...

The boom block with becket is attached to the aft end of the ILCA boom. Pass your mainsheet through the block, down to the traveler block, and back up to secure to the becket. This is the latest ball bearing version from Harken as included on all new...

Complete race spec Cunningham and Outhaul Kit for ILCA dinghes. Assembled using top end Harken hardware, the kit includes new, lightweight Harken airblocks, Dynemma SK78 primary lines, and Dinghy Control secondary lines. Cunningham is rigged as a cascade...

Replacement gudgeon for the ILCA dinghy and Laser sailboat. Two of these are mounted on the transom of the boat and used for attaching the rudder head. Installs with 4 screws (not included). Sold individually and made from a heavy duty plastic for long...

Complete autobailer assembly for the ILCA dinghy with bailer plate, chute door, bung, and screw. This is a class legal bailer with ILCA stamp on body of the bailer, and found on new production boats. Designed to be a direct replacement part for existing...

Complete Deck Cleat Plate assembly with Harken cleats and fairleads. Attaches to the ILCA dinghy deck with two screws and used for cleating your outhaul and cunningham lines that run back from the deck blocks mounted behind the mast.

The deck blocks plate is mounted just aft of the ILCA mast step and is a mounting point for two turning blocks for your outhaul and cunningham lines. This is the complete deck blocks plate assembly includes two Harken 16mm air blocks and is standard on...

The deck blocks plate is mounted just aft of the ILCA mast step and is a mounting point for two turning blocks for your outhaul and cunningham lines. This is the plate only, handly for replacing an old plate or for upgrading with your own favorite blocks.

Standard aluminum fairlead for the ILCA dinghy traveler. Attach one on each side of the transom deck.

The Bow Eye Fairlead is mounted on the bow of the ILCA dinghy and serves as a tie down point or place to attach your daggerboard retaining line.

Replacement base assembly for the Harken ILCA / Laser vang assembly. Stainless steel with integrated cleat and turning points. Made by Harken ILCA Class Approved

The vang key attaches to the upper vang block and slides into the boom vang plate that is mounted on the ILCA / Laser boom. It provides a quick but solid connection for easy rigging and unrigging, holding position while under tension. This is the latest...

The ILCA / Laser Harken Vang Assembly is a very popular ILCA dinghy upgrade. It features a 15:1 purchase, making fine-tune adjustments much easier and smoother. Kit includes base unit, top block, double block w/ becket, dyneema primary line, purple...

The Boom Vang Plate is attached to the forward section of the boom and has a slot for the vang key to slide into, forming the upper connection of your boom vang assembly. Stainless steel Attaches to lower side of forward end of boom Works on any ILCA...

The Boom Gooseneck Plug mounts to the forward end of the boom and has a hole to accept the stainless gooseneck fitting. Attaches with rivets. Plastic fitting Fits any ILCA dinghy or Laser sailboat boom Install with a 3/16 x 1/4 rivet (not included)