General Parts

RWO screw-in drain plug.  Screw-in plug  Plug hole diameter: 22mm / 0.88in Includes housing and plug Color: black Some use cases: Transom of RS600, Toppers, Laser/ILCA Which drain plug do I need?When replacing an existing drain...

Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy gauge alloy for stiffness and minimum distortion under load. Great for sheet leads...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

The Ronstan 15 mm Utility Block range offers small boat sailors a lightweight, stainless steel block range for a variety of applications such as control lines and shockcord tension systems. This is the basic loop head type single block, great for lashing...

This plastic cleat is suitable for low-load uses. A simple and economical cleat. Total Length: 3 1/4" Hole Center to Hole Center: 2 5/8" Width:  11/16" Fits Ropes 1/8" - 1/4" Durable Nylon construction Mounts easily to flat or rounded surfaces

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

RejeX is a thin-film polymer coating designed to provide a high-release protective finish for vehicles of all kinds. This very thin film - less than a micron thick - prevents stains and adhesion of common contaminants on the road such as exhaust, bugs,...

Repair that tear in you spinnaker with this handy Spinnaker Sail Repair Tape. This sticky back, nylon tape works great on lightweight spinnaker fabrics. Available in a 2 inch by 25 foot roll in multiple colors. Nylon tape with sticky back adhesive for...

Complete screw-in drain plug assembly by Holt Allen. Screw-in plug Housing screw hole spacing: 38mm / 1.5 inch Plug hole diameter: 22mm / 0.88 inch Includes housing and plug Color: Black Manufacturer: Allen Part Number: A.423 Some use...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. great for Control lines on dinghies and catamarans. Lightweight. Low, snag free profile. Base...

This is a standard bow shackle used commonly on the 420, FJ & V15 and as a mast bail on 3:1 purchase 420 vangs. It is an excellent shackle for all-around use with screw pin included. HAR 2110 1/4 inch / 6mm diameter screw pin for easy...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. great for Control lines on dinghies and catamarans. Lightweight. Low, snag free profile. Base...

Don't get caught with your sails down! Extra strong, Rip Stop white tape for temporary on-the-spot repairs to torn sails, canvas, even foul weather gear. Keep a roll in your toolbox for emergencies. 2 inch width 25 foot length White  

The C-Vane Pro bow mounted Laser wind indicator was designed by top Laser coach Ryan Minth. Building on the success of the legendary mast mounted wind indicator, C-Vane introduced this wind indicator as an alternative option for Laser sailors. The vane...