RS Aero Parts

Gooseneck Sheave for the RS Aero. This is the sheave for the vang control line. You need two, and they attach to the gooseneck assembly.

Boom Inboard End for the RS Aero. Connects to the boom using one rivet, whose part number is: FIX-R48-C18.

Replacement Gooseneck Spigot for the RS Aero. Connects the boom end plug to the Gooseneck Assembly.

Gooseneck Assembly for the RS Aero. Attaches to mast using four rivets, whose part number is: FIX-R48-C18.

Only the pigment is supplied. Clear gelcoat and catalyst will need to be purchased separately. Due to some tricky and expensive hazards goods rules around shipping, in most case these items will need to be sourced locally. 20g of RS Pigment mixed into...

Centerboard case gasket fluff for the RS Aero. Glued into the centerboard case to give the daggerboard a good tight fit, but it is also low friction so the board can still be easily pulled in and out.The item width is 13mm. Sold per meter. Also used on...

Selden Block Tie Deck Organiser for the RS Aero. Used on the Port side of the Mast Step to mount blocks for the outhaul and to secure the daggerboard bungee line. Used on the Starboard side of the Mast Step to mount blocks for the downhaul and vang.

This is a heavy duty polyester 'Flat Top' Cover for the RS Aero. This deck cover does not have a mast opening, so it is ideal for transportation or long term storage. Includes straps to secure cover to hull. Deck Cover for RS Aero Flat / Travel style...

Attachment point for Tactick compass mount.

This is the plastic insert at the rear of the daggerboard case. It provides a buffer between the daggerboard and the rear of the case.

The RS Aero has a vertical daggerboard for ease of use. The daggerboard is of a glass/carbon construction from CNC milled tooling, to a modern section developed successfully to reduce downwind drag whilst still generating enough lift upwind...

RS Aero Carbon Insert Set. Contains 2 Grab Rail inserts & 1 Bow Insert. Part numbers for individual inserts are: RSM-HF-407 (Grab rail inserts) and AER-HF-405 (Bow Plate).

Release key for the base of the RS Aero mainsheet cleat. Insert into the triangular opening in the mainsheet block shoe to release. The shoe and attached block then slide free.

Plastic boom plug used on aft end of RS Aero boom. Attach using two rivets, part number: FIX-R48-C18.

Boom for the RS Aero. Comes complete will all fittings and ties, does not include mainsheet or vang blocks.

The standard batten tip/batten cap used for the battens in the RS Aero & RS Neo mainsails, plus the key used to tension the battens. Adjust batten tension by turning the hex screw in the batten tip.