One Design Rigging

J/105 Mainsheet Gross Tune line, built by the experts in the West Coast Sailing Rig Shop. This mainsheet is made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 100 feet. End 1...

Mainsheet Fine Tune Line for the J/105. The Fine Tune Line is the secondary line in the mainsheet trimming system, designed for making smaller adjustments to the trim. We use 8mm Alpha Ropes SSR, a single braid blend of Spectra and Cordura...

J/105 Sprit Pole Control line, built by the experts in the West Coast Sailing Rig Shop. This control line is made from 8mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 34 feet with end...

J/105 Jib Sheet with Taper, built by the experts in the West Coast Sailing Rig Shop. Our Jib Sheet lines are made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 44 feet...

J/105 Tapered Spinnaker Halyard, built by the experts in the West Coast Sailing Rig Shop. This halyard is made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 100 feet. We add a...

J/105 Tapered Spinnaker Halyard, built by the experts in the West Coast Sailing Rig Shop. This halyard is made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 100 feet. The sail...

J/105 Tapered Jib Halyard, built by the experts in the West Coast Sailing Rig Shop. This halyard is made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 93 feet. We add a taper...

J/105 Jib Halyard, built by the experts in the West Coast Sailing Rig Shop. This halyard is made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 93 feet. The sail end includes a...

J/105 Tapered Main Halyard, built by the experts in the West Coast Sailing Rig Shop. This halyard is made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 100 feet. We add a taper...

J/105 Tapered Spinnaker Halyard, built by the experts in the West Coast Sailing Rig Shop. This halyard is made from 10mm Marlow D2 Race, a high-strength, lightweight all-round performance line, finished to a recommended length of 100 feet. The sail...

Introducing the EPIC Traveler, the ultimate traveler line for Laser and ILCA sailboats. An upgraded version of our popular Vectran Traveler, the EPIC Traveler is made from New England Ropes W2R, a line that is designed as a wire rope replacement. Its...

The Laser / ILCA Outhaul Mast Loop w/ Block (Single Block) features a single Harken T18 block spliced to Dyneema with an eye in the other end. Simply wrap the line around the mast and past the block through the eye - easy to use whether the sail is up or...

Custom Spliced 6:1 Cunningham w/ Technora Control Line for Laser/ILCA Upgrade your Laser / ILCA cunningham control to a 6:1 purchase system with this complete set up from our Rig Shop. Our 6:1 cunningham uses a set of two Harken 29mm T2 carbo blocks to...

Use this Outhaul Strop if you are rigging a Laser 4.7 / ILCA 4 rig with our 6:1 Outhaul PRO setup. This strop is made from Dyneema with spliced loops at each end so that you can extend the primary line on the outhaul to accommodate the shorter foot...

The Laser / ILCA Outhaul Mast Loop w/ Block (Double Block) features two Harken T18 block spliced to Dyneema with an eye in the other end. Simply wrap the line around the mast and past the blocks through the eye - easy to use whether the sail is up or...

Updated Laser / ILCA Clew Inhauler from the West Coast Sailing Rig Shop. The ultimate easy on/off clew inhaul solution features a closed loop for luggage tagging on your boom cleat and a loop and stopper ball closure. After connecting the loop to your...