ILCA / Laser Parts

Nylon wear protection pads for the Laser / ILCA dinghy. Designed to stop the mainsheet blocks from damaging the deck of the boat. The wear protectors clip around the traveler fairlead and are held in place by friction and the traveler rope. There is no...

Base plug for the bottom of the ILCA 6 / Laser Radial Composite Lower Mast Section. This plug is specific for the composite lower and not designed for the aluminum lower mast section.  Base Plug ILCA 6 Composite Lower Other Base Plugs: ILCA...

Complete race spec Cunningham and Outhaul Kit for ILCA dinghes. Assembled using top end Harken hardware, the kit includes new, lightweight Harken airblocks, Dynemma SK78 primary lines, and Dinghy Control secondary lines. Cunningham is rigged as a cascade...

Replacement traveler block for ILCA sailboats. The small size traveler block connects to the large size trabeler block with integrated sister clips. This is the 'traveler' side of the set up. Pass your traveler line from one end of the transom, through...

Replacement traveler block for ILCA sailboats. The large size traveler block connects to the small size traveler block with integrated sister clips. This is the 'mainsheet side' of the traveler set up and is mounted at the top. Pass your mainsheet down...

The hiking strap plate is a small, flat plastic plate that is mounted over your hiking strap. Installed just forward of the cockpit wall and behind the mainsheet eyestrap. Can be used on any Laser sailboat or ILCA dinghy.

Padded hiking strap for ILCA sailboats from Hyde. 

Replacement ILCA Vang Tang. This stainless steel vang tang is used to connect the lower vang block to mast. Installs with rivets and compatible with all size ILCA lower mast sections and all existing boom vang assemblies that connect with a pin...

Complete screw-in drain plug assembly by Holt Allen. Screw-in plug Housing screw hole spacing: 38mm / 1.5 inch Plug hole diameter: 22mm / 0.88 inch Includes housing and plug Color: Black Manufacturer: Allen Part Number: A.423 Some use...

This is an upgraded 15:1 purchase boom vang for Laser® sailboats. This complete vang assembly includes all blocks and line for a quick installation. This vang is not class legal for racing but ideal for training or recreational use. Complete...

The Allen 20mm Micro Hook Block is deal for dinghy control systems where a quick release is necessary. Great for ILCA / Laser outhaul clew, Tasar halyards, and other small boat halyards that use a fine tune adjuster. Ball Bearings Micro single block...

The Tiller Joint Universal connects a tiller extension with a tiller. The flexible rubber allows for a full range of motion with the tiller extension. New tiller extensions come with a joint universal, so you can use this one to replace one that has...

This stainless steel eyestrap provides the attachment point for the boom blocks on the 420, FJ, V15, and Laser. Original Equipment Stainless Steel 40mm Hole Spacing 19mm Eyestrap Height

Replacement rudder lift stop for Laser sailboats and ILCA dinghies. This stainless steel tang keeps your rudder in place during a capsize and is commonly installed between the two gudgeons, with the tab racing down. Stainless steel Installed in line...

Replacement lower vang block for Laser® sailboats and ILCA dinghies. This 'jam' style block has a cleat for securing your vang line in the older 3:1 (sometimes called 'classic') vang assembly found on older boats. Not class legal for racing...

Standard drain plug fitting from Holt Allen. Complete assembly with screw in plug and housing, with 1 inch plug hole diameter and 1.5 inch mounting hole spacing for drain plug housing. Screw-in plug Housing screw hole spacing: 38mm / 1.5 inch Plug hole...