ILCA / Laser Parts

The 30mm Extreme High Load Vang Block from Allen Brothers (Part Number A2031XHL-873) is a new Laser / ILCA specific vang block featuring a 30mm Extreme High Load Block (XHL) with removable vang key. The block features the same extreme high...

The boom block with becket is attached to the aft end of the ILCA boom. Pass your mainsheet through the block, down to the traveler block, and back up to secure to the becket. A great upgrade for an older boat, particularly for light air sailing!...

The standard boom block is mounted to the mid point of the ILCA boom. Pass your mainsheet up from your mainsheet block, through the boom block, and then aft to the boom block with becket to complete your rigging. Attaches to the boom with the stainless...

Integrated large and small ILCA traveler block from Allen with ball bearings for great performance. Replaces the standard 'traveler block large' and 'traveler block small' which are connected with a sister clip to reduce the space between the blocks and...

These screw caps cover the screws that secure the Laser / ILCA traveler fairleads. This prevents the sharp end of the screw from being exposed. Self tapping Plastic fitting Sold Individually

30mm Single High Load Dynamic Block With Fork Head. High load blocks feature a stainless-steel sheave. This upgrade offers even faster rolling speeds, higher working loads and lower friction when compared to the standard acetal sheave. The...

Nylon wear protection pads for the Laser / ILCA dinghy. Designed to stop the mainsheet blocks from damaging the deck of the boat. The wear protectors clip around the traveler fairlead and are held in place by friction and the traveler rope. There is no...

This aluminum Clam Cleat includes a becket that holds the end of the rope under the cleat to allow rigging with a 2:1 advantage. Becket also holds shockcord & bungee.  No need for extra parts. Ideal for Cunningham adjustment on small boats, or...

Complete screw-in drain plug assembly by Holt Allen. Screw-in plug Housing screw hole spacing: 38mm / 1.5 inch Plug hole diameter: 22mm / 0.88 inch Includes housing and plug Color: Black Manufacturer: Allen Part Number: A.423 Some use...

This is an upgraded 15:1 purchase boom vang for Laser® sailboats. This complete vang assembly includes all blocks and line for a quick installation. This vang is not class legal for racing but ideal for training or recreational use. Complete...

The Allen 20mm Micro Hook Block is deal for dinghy control systems where a quick release is necessary. Great for ILCA / Laser outhaul clew, Tasar halyards, and other small boat halyards that use a fine tune adjuster. Ball Bearings Micro single block...

This strong alloy clam ('jam') cleat is perfect for a variety of applications from halyards to travelers to control lines. Integrated fairlead guides line into cleat Mounts easily to flat or curved surfaces Suitable for use with 3mm to 6mm lines...

The Tiller Joint Universal connects a tiller extension with a tiller. The flexible rubber allows for a full range of motion with the tiller extension. New tiller extensions come with a joint universal, so you can use this one to replace one that has...

This stainless steel eyestrap provides the attachment point for the boom blocks on the 420, FJ, V15, and Laser. Original Equipment Stainless Steel 40mm Hole Spacing 19mm Eyestrap Height

Replacement lower vang block for Laser® sailboats and ILCA dinghies. This 'jam' style block has a cleat for securing your vang line in the older 3:1 (sometimes called 'classic') vang assembly found on older boats. Not class legal for racing...

Standard drain plug fitting from Holt Allen. Complete assembly with screw in plug and housing, with 1 inch plug hole diameter and 1.5 inch mounting hole spacing for drain plug housing. Screw-in plug Housing screw hole spacing: 38mm / 1.5 inch Plug hole...