Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Use with Harken 241 cam base. A (mm)32 mm A (in)1 1/4 in B (mm)38 mm B (in)1 1/2 in Fasteners (mm)5 RH...

Harken two way link enables you to mount a Harken main sheet block to a swiveling base plate. This improves flexibility and makes it easier to trim the mainsail. Designed to connect EX1410 swivel base plate with ratchet block. Includes two clevis pins...

The Harken Swivel Cam Cleat is a simple swivel base for main and jib sheets on small sailboats. Includes a swivel base, bullseye fairlead, and standard Harken cam cleat. The base rotates 360 degrees making it easy to cleat and un-cleat from any angle...

29mm 90 Degree Traveler Blocks from Harken. 29mm Two single blocks at 90 angle for use with traveler applications Made by Harken

These rubber "O" rings are part of the Sunfish Bailer, placed between the hull and the bailer housing to create a nice seal. Available in a 5 pack so you'll have spares. Pack of 5 rubber rings Class legal for the Sunfish Fits both the 1-5/16 and 13/16...

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

Large stainless eyestrap from Harken. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Traveler Block Eyestrap (x2)    

40mm Carbo Fiddle Block from Harken. 40mm Fiddle block with a becket Made by Harken ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Vang Floating Block (x1) Sonar Lower...

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

Quickly and securely attach your outhaul to the clew of the sail. This assembly includes a 16mm Harken ball bearing block and captive-locking shackle ensure smooth action and no unwanted releases! Lowers friction Speeds up the rigging...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees. Add to a standard Harken cam cleat (not included). ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Aluminum construction Works with line diameters...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. A (mm)48 mm A (in)1 7/8 in B (mm)10 mm B (in) 3/8 in C (mm)38 mm C (in)1 1/2 in D (mm)14 mm D (in) 9/16...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Sheave: 22 mm / 7/8 in Length: 64 mm / 2 1/2 in Weight: 43 g / 1.5 oz Maximum line: 6 mm /...

Line kit for the Hobie 16 Catamaran (not including halyards). Includes fuzzy soft main and jib sheets and low stretch control lines. Now with double grommet lacing line (double grommet length - trim excess if you have a single grommet tramp). Trapeze...

Lightweight, fiber-reinforced fairleads feature stainless wear guards for long life and are available in various colors for color-coding your cams. Height above cam (in) 5/8 in Height above cam (mm)16 mm Length (mm)56 mm Length (in)2 3/16 in Width...