This aluminum Clam Cleat includes a becket that holds the end of the rope under the cleat to allow rigging with a 2:1 advantage. Becket also holds shockcord & bungee.  No need for extra parts. Ideal for Cunningham adjustment on small boats, or...

This Ronstan cam cleat fairlead is easily fitted to existing T-Cleat and C-Cleat cam cleats. Allows precise cleating and release from any lead angle with lower entry efforts for off-centre cleating. Made from a tough, abrasion resistant composite...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

The Harken Swivel Cam Cleat is a simple swivel base for main and jib sheets on small sailboats. Includes a swivel base, bullseye fairlead, and standard Harken cam cleat. The base rotates 360 degrees making it easy to cleat and un-cleat from any angle...

This strong alloy clam ('jam') cleat is perfect for a variety of applications from halyards to travelers to control lines. Integrated fairlead guides line into cleat Mounts easily to flat or curved surfaces Suitable for use with 3mm to 6mm lines...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. This is a great cleat for spinnaker sheets on smaller sailboats. Notched cutout on port side of cleat. Lightweight Aluminum construction Mounts easily to deck Notched...

This is a trapeze cleat for a spinnaker and trapeze rigged 420. The integrated block allows for additional purchase. This cleat provides a quick and solid lock that is easy to release, making it the preferred choice for adjusting trapeze lines. ...

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

Hard anodized aluminium clamcleat for downhaul on the Optimist Blackgold mast. A standard for racing spars! Original equipment on BlackGold spars Hard anodized aluminum

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees. Add to a standard Harken cam cleat (not included). ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Aluminum construction Works with line diameters...

Clamcleat CL211 MK2 cleat for Optimist downhaul and halyard on Silver masts. Compatible with 'Silver' Opti masts Works with downhaul and halyard  

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. This is a great cleat for spinnaker sheets on smaller sailboats. Cut out located on starboard side of cleat. Lightweight Aluminum construction Mounts easily to deck...

Lightweight, fiber-reinforced fairleads feature stainless wear guards for long life and are available in various colors for color-coding your cams. Height above cam (in) 5/8 in Height above cam (mm)16 mm Length (mm)56 mm Length (in)2 3/16 in Width...