If you are not using STA/Masters, you are most likely using the hit-and-miss method to set your spar wire tension. That method may have been fine years ago, but today it simply is not good enough. With it's unique readable measurements, you can use the STA/Master shroud adjuster to easily repeat exact tension settings for each sailing situation.
The STA/Master's finely calibrated center traveler quickly locks for exact repeatable settings for each wind and water condition. Precision crafted of top quality stainless steel for long, trouble-free life. This is the #332 model with 3/32 inch wire diameter.
- Wire Diameter - 3/32 inch (2mm)
- Tensile Strength - 1800 lbs (820kg)
- Pin Size - 3/16 inch (5mm)
- Minimum Length - 3-1/4 inch (83mm) *
- Maximum Length - 5-3/8 inch (137mm) *
- STA/Master Part #332
- Sold Individually
- Stainless Steel
*Length is measured from center of top pin hole to center of bottom pin hole.