RS Sailing

Spinnaker Pole Mast Fitting for the RS Quest. Used to attach the spinnaker pole on RS Quests using symettrical spinnakers. Secured to the lower mast using 3x rivets, whose part number is FIX-R48-M18...

Bow Tube for the RS Quest Bow Sprit/Spinnaker Pole. Allows the Spinnaker Pole to be extended/retracted through the bow.

Pair of shrouds for the RS Quest.

Shroud Lever used on the RS Quest. Used as the lowest portion of the forestay assembly. Length: 280mm.

An eyebolt that passes through the hull (at the gunwale) and into the Under Gunwhale Recess Bar on the RS Quest. The eyebolt provides the attachment point for the shroud adjusters. The part number...

Pair of shroud adjuster covers for the RS Quest.

27mm Fairlead by Selden. Used on the RS Quest to fair the spinnaker halyard as it runs down the centerline between the two 30mm ball bearing blocks. The part number for the blocks is P403101SLC...

27mm Cam Cleat by Selden. Used on the RS Quest to secure the spinnaker sheet, and spinnaker halyard, among other applications.

45mm Auto Ratchet Block used for the Spinnaker Sheet on the RS Quest. Attaches to the Shroud Eye Bolt using a D Shackle. The part numbers for the eye bolt and shackle are QUE-HF-304 and A-621104,...

Transom plate for the RS Quest. Used for mounting the upper and lower gudgeons. The part numbers for the upper and lower gudgeons are C16-HF-502 and RSM-HF-506, respectively.

Rudder Blade for the RS Quest. Blade only, purchase blade top and blade bottom tip separately. The part numbers for the blade top and bottom tip are RSM-FO-912 and RSM-FO-909, respectively.

Reefing hook used to secure the tack of the RS Quest Mainsail. Used in reefing the mainsail. Attaches to the gooseneck whose part number is 509-081-01.