RS Sailing Parts

Tiller Tube for the RS Quest. This is a bare tube. 

End plug for the RS Quest tiller tube.

Selden Spreader Length Adjuster. Used on RS100, RS200, RS400, RS500, RS800, and RS2000.

Replacement spinnaker Sock for the RS Quest sailboats. Standard black mesh construction.

Spinnaker Pole for use with an Asymmetrical Spinnaker on the RS Quest.

Pair of shrouds for the RS Quest.

Shroud Lever used on the RS Quest. Used as the lowest portion of the forestay assembly. Length: 280mm.

An eyebolt that passes through the hull (at the gunwale) and into the Under Gunwhale Recess Bar on the RS Quest. The eyebolt provides the attachment point for the shroud adjusters. The part number...

Pair of shroud adjuster covers for the RS Quest.

27mm Cam Cleat by Selden. Used on the RS Quest to secure the spinnaker sheet, and spinnaker halyard, among other applications.

Reefing hook used to secure the tack of the RS Quest Mainsail. Used in reefing the mainsail. Attaches to the gooseneck whose part number is 509-081-01.

Pair of mast head shims and 8 rivets used to secure them to the mast for the RS Quest. Shims serve as the anchor surface for attaching the masthead float brackets, whose part number is RSM-SP-911.

Mast Foot/Plug for the RS Quest. Includes upgraded pivot pin. Connects the bottom of the RS Quest mast to the mast step, whose part number is QUE-HF-200.

Pivot Pin for the RS Quest Mast Step. Use with RS Quest Mast Plug/Foot, whose part number is QUE-SP-904.

Mast Step for the RS Quest. Attaches to the Beam Assembly using 2x rivets. The part numbers for the Beam Assembly and rivets are QUE-HF-105 and FIX-R64-M18, respectively.

Masthead Float kit for the RS Quest from RS Sailing. Add peace of mind with a mast float to help keep the top of the mast above water in the event of a capsize. Sold Mast Flat Includes mounting...