RS Sailing Parts

Mast boom collar for the RS Zest. Used to attach the boom endboard end fitting/gooseneck, and therefore the boom, to the mast. The part number for the boom end fitting is FEV-SP-911.

RS Zest bow eye bolt. Attach with washer and Nyloc M8 nut, whose part numbers are FIX-W8-002 and FIX-N8-008, respectively.

Batten set for the RS Zest main sail. Includes 3 battens. The part number for the main sail is ZES-SA-100.

Scupper Flap Hinge for the RS Venture. Size 370mm x 50mm kiss cut with 5mm radius corners. Material polymetric high tack clear vinyl.

Scupper Flaps for the RS Venture. Allows water to drain out of the cockpit.

Rudder Pivot Bolt for the RS Venture.

Traveler block for the RS Tera. This is a Plain Bearing 38mm Single Block with an inglefield clip. Maximum line size: 10mm. Maximum working load: 341 lbs.

Deck Collar for the RS Tera. Attaches to the mast using 1x rivet. The bottom of the collar passes through the mast step deck plate and then is locked into place by turning the mast. The part numbers for the rivet and deck plate are FIX-R48-M12 and...

Padded Hiking Strap for the RS Tera. This is the standard hiking strap which comes with the boat.

Mast gooseneck collar for securing the boom to the mast. Attaches to the mast using 1x rivet, whose part number is FIX-R48-M12.

Boom Protector for the RS Tera. Black padding which Velcros around the boom.

Boom Jaw/Inboard End Plug for the RS Tera Boom. Attaches using 1x rivet, whose part number is FIX-R48-M18.

Batten Set for the RS Tera Sport Mainsail.

End plug for the RS Quest tiller tube.

Selden Spreader Length Adjuster. Used on RS100, RS200, RS400, RS500, RS800, and RS2000.

Shroud Lever used on the RS Quest. Used as the lowest portion of the forestay assembly. Length: 280mm.