ILCA / Laser Parts

Laser mainsheet pre cut from 7mm Bzz line. This is one of our favorite line options, with low stretch and a great feel in the hand. Line: 7mm Bzz Length: 44 Feet

Replacement bullet block with beck for Laser sailboats. The bullet block with becket is attached to the aft end of the boom. Run your mainsheet aft, through this block, down to the traveler block and back up, tying off to the becket. Not class legal for...

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race. Sheave 16 mm / 5/8 in Length: 54 mm / 2 1/8...

Vang Line for classic rigged Lasers (basic 3:1 purchase system), pre cut to our recommened length of 10 feet. Line: 5mm Robline Sirius 500 Length: 10 Feet (Quantity 1 = 10 foot length) Typically cut from red/silver spool, but exact color may vary ...

The Laser daggerboard clip line is used to attach a plastic clip from the daggerboard bungee to the daggerboard itself. Line: 4mm Robline Sirius 500 Length: 2 Feet (Quantity 1 = 2 Foot Section of Line) Typically cut from Blue/Silver spool but color may...

These 12 inch die-cut sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any...

Heavy duty deck cover that protects your boat in all conditions. North Winds Canvas Gorge Series Covers The Gorge Series from NWC represents the finest in covers available for your boat. Handmade to order right here in Portland, all Gorge Series covers...

Keep your Laser sailboat secure to the dolly or dock with a floating bowline, pre cut to our recommended length of 10 feet. Line: 8mm PolyPro Length: 10 Feet

Laser vang control line pre cut from Excel Racing line. This line has a spectra core with polyester cover for great grip in the vang cleat and substantial holding power.  Designed to work with the class legal 16:1 Laser / ILCA vang assemblies...

These 9 inch digital sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any...

The Laser / ILCA Mast Wear Strips are made of thin strips of teflon. They are used to reduce the friction between the Laser / ILCA mast and the step. Mount one at the bottom end of your mast and one just below the deck line. 1 mm teflon Adhesive-backed...

This stainless steel eyestrap provides the attachment point for the boom blocks on the 420, FJ, V15, and Laser. Original Equipment Stainless Steel 40mm Hole Spacing 19mm Eyestrap Height

Downhaul line for the Laser rudder, pre-cut from 4mm Robline Sirius line for your convenience to 4 feet. Line: 4mm Robline Sirius 500 Length: 4 feet (Quantity 1 = 4 foot section of line) Typically cut from Red/Silver spool but color may vary Looking...

Replacement rudder lift stop for Laser sailboats and ILCA dinghies. This stainless steel tang keeps your rudder in place during a capsize and is commonly installed between the two gudgeons, with the tab racing down. Stainless steel Installed in line...

The Laser Outhaul Dangle Line is designed to secure your outhaul blocks around the lower mast section at the gooseneck fitting. Use on boats with upgraded Outhual and Cunningham systems. Line: 4mm Robline Sirius 500 Length: 2 feet (Quantity 1 = 2 foot...

Replacement lower vang block for Laser® sailboats and ILCA dinghies. This 'jam' style block has a cleat for securing your vang line in the older 3:1 (sometimes called 'classic') vang assembly found on older boats. Not class legal for racing...