ILCA / Laser Parts

A low-friction Harken 29mm Carbo AirBlocks from Harken. A lightweight, strong, reliable and affordable block. This variation comes with a removable bolt through the middle so it can be undone and connected to various locations on your boat...

Custom Spliced 6:1 Cunningham w/ Technora Control Line for Laser/ILCA Upgrade your Laser / ILCA cunningham control to a 6:1 purchase system with this complete set up from our Rig Shop. Our 6:1 cunningham uses a set of two Harken 29mm T2 carbo blocks to...

Use this Outhaul Strop if you are rigging a Laser 4.7 / ILCA 4 rig with our 6:1 Outhaul PRO setup. This strop is made from Dyneema with spliced loops at each end so that you can extend the primary line on the outhaul to accommodate the shorter foot...

The Laser / ILCA Outhaul Mast Loop w/ Block (Double Block) features two Harken T18 block spliced to Dyneema with an eye in the other end. Simply wrap the line around the mast and past the blocks through the eye - easy to use whether the sail is up or...

Updated Laser / ILCA Clew Inhauler from the West Coast Sailing Rig Shop. The ultimate easy on/off clew inhaul solution features a closed loop for luggage tagging on your boom cleat and a loop and stopper ball closure. After connecting the loop to your...

This Laser / ILCA class legal set up is the best way to control your daggerboard. Easy on/off attachment to the blade with an ultra-lightweight snap shackle. Eliminates daggerboard creep with sailing upwind by applying maximum pressure vertically rather...

Keep your Laser / ILCA Harken Vang Base in top condition by replacing your worn out fairlead. Modern control lines with Technora and other high strength fibers can wear the edges of your fairlead, leading to premature wear on your control line. Flipping...

The Laser / ILCA Vang Upper Block is a Harken wire block with becket with attached vang key. It features indented sides to prevent the line from slipping off the sheave. The included vang key is the latest 'updated' style with larger head for...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Sheave: 22 mm / 7/8 in Length: 64 mm / 2 1/2 in Weight: 43 g / 1.5 oz Maximum line: 6 mm /...

The mainsheet spring keeps the mainsheet block upright, making it easier to sheet and preventing the line from kinking. Use on a variety of small sailboats. Stainless Steel 2 inch Tall

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race. Sheave 16 mm / 5/8 in Length: 54 mm / 2 1/8...

Harken soft-attach Fly blocks are designed to provide strength without mass, providing sailors with big power in a low-aero package. Designed specifically for high-tech line, these efficient blocks have an incredible working load for their small size...

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. On/off switch operates from both sides. Standard grip: medium/light air; 10:1 holding power. Sheave: 57 mm / 2 1/4...

This traveler for Laser and ILCA sailboats is made of extremely strong, zero stretch Vectran for the tightest leech tension possible. The line is brummel spliced at the load bearing point to eliminate bulk underneath the tiller and keeping it class legal...