Hardware

Stamped shackles are used on most small boat blocks and are appropriate for low loads. This shackle has a 6 mm / 1/4 inch pin with a ring for easy attachment. For higher loads, select forged and high-resistance shackles instead. Shackle pin: (mm)6...

Heavy duty stainless steel bow shackle from Ronstan with pin. Features a 1/4 inch diameter pin (A), 13/16 inch working width (B), and a 3/4 inch working length (C). A: 6.4 mm / 1/4 inch B: 21.0 mm / 13/16 inch C: 19.0 mm / 3/4 inch Working Load: 1400 kg...

Zim Sailing has developed a new aluminum tiller for Cal Style CFJ sailboats that is now class approved! The plastic wedge makes our CFJ tiller compatible with a wide range of rudder heads for CFJs from different builders and different years. Say goodbye...

The Harken Swivel Cam Cleat is a simple swivel base for main and jib sheets on small sailboats. Includes a swivel base, bullseye fairlead, and standard Harken cam cleat. The base rotates 360 degrees making it easy to cleat and un-cleat from any angle...

This strong alloy clam ('jam') cleat is perfect for a variety of applications from halyards to travelers to control lines. Integrated fairlead guides line into cleat Mounts easily to flat or curved surfaces Suitable for use with 3mm to 6mm lines...

The Jamaica Tiller Extension is the same as the popular Deluxe tiller extension is built from black anodized aluminum. The extension comes with a comfortable and sylish foam grip and a releasable universal with a fiber core. Black anodized aluminum...

Standard Optimist tiller is built with two rectangular aluminum tubes which are mounted together. includes all fittings, bolts, nuts, and washers needed for installation. Suitable for all Opti rudder blades Includes all necessary parts Official...

Wire fairleads maintain a low profile while holding the line close to the cleat.. Height (mm)32 mm Height (in)1 1/4 in Length (mm)65 mm Length (in)2 9/16 in Width (mm)32 mm Width (in)1 1/4 in Weight (g)14 g Weight (oz)0.5 oz Fastener spacing (mm)38 mm...

Tiller Extensions from Ronstan Ronstan "Battlestick" tiller extensions are popular for their lightweight, rigid construction and great helm response. The unique fluted profile adds extra rigidity to the lightweight alloy section. These extensions feature...

The Tiller Joint Universal connects a tiller extension with a tiller. The flexible rubber allows for a full range of motion with the tiller extension. New tiller extensions come with a joint universal, so you can use this one to replace one that has...

'Ring dings' or 'split rings' prevent pins from falling out on the boat. 3/8" size single ring. Single ring Stainless steel 3/8" Diameter Made by Ronstan

This shackle is used primarily to attach jib halyard to head of jib sail on 420, FJ, and V15. Supplied by Zim Sailing. Captive locking pin Easy twist and release Part Number 20030 Previous LP Part Number 90570 One Design...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. This is a great cleat for spinnaker sheets on smaller sailboats. Notched cutout on port side of cleat. Lightweight Aluminum construction Mounts easily to deck Notched...

Long dee shackles have a longer internal length clearance for fitting to longer or irregular shaped objects with a greater distance between fixing points, such as attaching an outhaul line to a press ring on a sail. A: 4.0 mm B: 26.0 mm C: 10.0 mm P.L...

This is a trapeze cleat for a spinnaker and trapeze rigged 420. The integrated block allows for additional purchase. This cleat provides a quick and solid lock that is easy to release, making it the preferred choice for adjusting trapeze lines. ...

1/4 inch x 1-1/4 inch stainless steel clevis pin with zinc finish from Ronstan. Features a 1-1/4 inch grip length (distance between cap and pin hole) and 1-7/16 total pin length. Pin Diameter is 1/4 inches Pin Grip Length is 1-1/4 inch Sold individually...