Hardware

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: Melges 24...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Loop cars matched with Carbo T2 Air blocks attached with high-tech line provide the ultimate lightweight, low-profile system. ONE DESIGN...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: Lightning...

When end controls are not used, add end stops to absorb shock loads. Recommended for use with Harken 2721, 2725, and 374 tracks.  Set of 2 end stops Recommended Fasteners 5mm/#10 FH inch Use with Harken track/rail part numbers 2721, 2725,...

This optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast...

Harken Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without...

This Ronstan cam cleat fairlead is easily fitted to existing T-Cleat and C-Cleat cam cleats. Allows precise cleating and release from any lead angle with lower entry efforts for off-centre cleating. Made from a tough, abrasion resistant composite...

This cam cleat saddle is used to keep the uncleated line within close proximity to the cleat, facilitating recleating. Made from grade 316 stainless steel and suitable for medium Ronstan T-Cleat and C-Cleat cam cleats. Grade 316 stainless steel Weight -...

This cam cleat saddle is used to keep the uncleated line within close proximity to the cleat, facilitating recleating. Made from grade 316 stainless steel and suitable for small Ronstan T-Cleat and C-Cleat cam cleats. Grade 316 stainless steel Weight -...

The Ronstan T-Cleat medium cam cleat is the product of intensive development efforts, producing a range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)16 mm Height (in) 5/8 in Length (mm)48 mm Length (in)1 7/8 in Width (mm)24 mm Width (in)...

Zim Sailing has developed a new aluminum tiller for Cal Style CFJ sailboats that is now class approved! The plastic wedge makes our CFJ tiller compatible with a wide range of rudder heads for CFJs from different builders and different years. Say goodbye...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. This micro riser has a 15 degree angle. Height (mm)19 mm Height (in) 3/4 in Length (mm)48 mm Length...

The fine tune stay adjuster provides for a quick and easy way to adjust stay tensions. It greatly reduces the risk of losing the stay when adjusting rig tension. 316 stainless steel Pin - 3/16 inch Increment Length - 5/32 in. Qty. Adjustment Settings -...