Accessories

  This fid is currently unavailable from Selma. You can still purchase a full set of fids in the Selma Rope Splicing Kit   4mm (3/16 inch) fid from Selema. This stainless steel needle is designed for assisting with splicing of 1/8 inch to...

Bring your sailing experience to a new level. Traditional wind indicators tend to be fragile and easily bent or get broken. Not anymore! Davis Instruments introduces new Optimist Pro Wind Vane, made from black fiber glass and duraluminum. Handmade...

Bring your sailing experience to a new level! Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. This a dinghy race pro gooseneck wind vane for Laser,...

Bring your sailing experience to a new level! Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. handmade carbon masthead wind vane for 16-28 ft boats...

Bring your sailing experience to a new level! Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. Feature precise balance – Olympic Boat Carbon...

The Great Hawk is a scaled up version of the original Hawk. It is designed for cruising and racing yachts up to 20m. The vane and arms are made of super tough, glass-filled Nylon 12, for improved rigidity, durability, and UV resistance over similar...

The Hawk is lightweight with a balanced arm and a "V" jewel bearing surface. The vane is made of super tough, glass-filled Nylon 12, for improved rigidity, durability, and UV resistance over similar looking polycarbonate versions on the market. It is all...

Replacement drain plug from Ronstan. This is the PLUG ONLY - No plastic housing included. See Ronstan 30mm Bow Drain Plug for plug + housing.   Which drain plug do I need? When replacing an existing drain plug, it can be difficult to know...

Take care of your sails! The Rooster Sail Tidy will keep your sail secure without needing to crush it with ties or tape. This is the 'Large' size version that is suitable for jibs with a wire luff and large dinghy main sails. 20cm x 28cm

Masthead Float kit for the RS Quest from RS Sailing. Add peace of mind with a mast float to help keep the top of the mast above water in the event of a capsize. Sold Mast Flat Includes mounting brackets 14L Capacity Also works on the RS Cat 16 and RS...

A twin tube mast Flotationbag. It slides up and down the mast at the same time as the mainsail, which makes it a very tidy and unobtrusive design. Helps prevent a full inversion. Total capacity 8 liters. Only works on boats with a mainsail mast track...

RWO screw-in drain plug.  Screw-in plug  Plug hole diameter: 22mm / 0.88in Includes housing and plug Color: black Some use cases: Transom of RS600, Toppers, Laser/ILCA Which drain plug do I need?When replacing an existing drain...

RejeX is a thin-film polymer coating designed to provide a high-release protective finish for vehicles of all kinds. This very thin film - less than a micron thick - prevents stains and adhesion of common contaminants on the road such as exhaust, bugs,...

Repair that tear in you spinnaker with this handy Spinnaker Sail Repair Tape. This sticky back, nylon tape works great on lightweight spinnaker fabrics. Available in a 2 inch by 25 foot roll in multiple colors. Nylon tape with sticky back adhesive for...

Complete screw-in drain plug assembly by Holt Allen. Screw-in plug Housing screw hole spacing: 38mm / 1.5 inch Plug hole diameter: 22mm / 0.88 inch Includes housing and plug Color: Black Manufacturer: Allen Part Number: A.423 Some use...

The C-Vane Pro bow mounted Laser wind indicator was designed by top Laser coach Ryan Minth. Building on the success of the legendary mast mounted wind indicator, C-Vane introduced this wind indicator as an alternative option for Laser sailors. The vane...