The sail rings fit around the booms and clip onto the sail, holding it securely. Sold in a 30 pack, enough to complete one sunfish sail. 30 Pack (Enough for one sail with two spare rings) White Plastic Fittings Fits all Sunfish sails Easy...

Use this Outhaul Strop if you are rigging a Laser 4.7 / ILCA 4 rig with our 6:1 Outhaul PRO setup. This strop is made from Dyneema with spliced loops at each end so that you can extend the primary line on the outhaul to accommodate the shorter foot...

V15 Vang Pro: Dinghy Control 5mm VG15152West Coast Sailing Rig ShopThis item is hand built by our Rig Shop using industry leading best practices for splicing and rigging so you can be confident in a strong and dependable finished product. It was...

V15 Outhaul Pro: Dinghy Control 5mm VG15142West Coast Sailing Rig ShopThis item is hand built by our Rig Shop using industry leading best practices for splicing and rigging so you can be confident in a strong and dependable finished product. It was...

V15 Cunningham Pro: Dinghy Control 5mm VG15132West Coast Sailing Rig ShopThis item is hand built by our Rig Shop using industry leading best practices for splicing and rigging so you can be confident in a strong and dependable finished product. It was...

V15 Jib Sheet: SSR 8mm VG15121 West Coast Sailing Rig ShopThis item is hand built by our Rig Shop using industry leading best practices for splicing and rigging so you can be confident in a strong and dependable finished product. It was developed to meet...

Complete Jib Halyard Assembly for the Vanguard 15 sailboat, as originally included with new production boats. This is a two part halyard with a wire component and a rope tail for cleating to your mast. 1/8 inch wire is swaged to the top off a Harken 22mm...

Custom Vanguard 15 (V15) mainsheet from the West Coast Sailing Rig Shop. This main sheet is made from 8mm Alpha Ropes SSR with integrated Dyneema split tail, which forms the mainsheet bridle. Tie off the end of each tail to the fairleads on each side of...

Replacement shroud for Vanguard 15 (V15) sailboats using standard pin shroud adjusters. Made from 1/8 inch marine grade wire with eye swaged to each end. Vanguard 15 shroud Compatible with pin shroud adjusters (most common) Sold individually  West...

Jib Halyard Adjuster line for the Vanguard 15. Made from 5mm Excel Racing line with end whips for durability.West Coast Sailing Rig ShopThis item is hand built by our Rig Shop using industry leading best practices for splicing and rigging so you can be...

The Melges 24 backstay bridle is made with eyes at either end, one luggage eye and one standard eye, using 5mm Amsteel AS-78 for super low stretch and top performance. Recommended length by class experts so you can be sure of a great fit on your Melges...

This is a high performance Melges 24 Main Halyard with end whip and a reeving eye on the tail for easy installation. This option is made from Marlow D2 Racing, a pre-stretched, bio-based double braid line that is a great high-strength and lightweight...

The Melges 24 Backstay Control Line is cut to a recommended length for most rigs and finished with an end whips on both dead ends for extended durability. Made from 6mm Marlow Excel Racing, with a Dyneema SK-78 core for low stretch and a 16 plait...

Our Melges 24 Tack Line made from 8mm Marlow D2, which features a Dyneema SK-75 core for negligible stretch with a durable polyester cover. Finished with End Whips for durability. An awesome performance upgrade for any Melges 24 sailor! Line:...

A performance option for our Melges 24 Tack Line, this version is tapered to reduce weight and increase efficiency. We taper the Admiral 5000 line to remove the 24-plair cover and expose the Dyneema SK-78 core in the forward part of the tack line. The...

Our Melges 24 Furler Line is whipped on both ends for durability and cut to the perfect length for your furling system. Made from Marlow Super Pre-Stretch, 100% polyester single braid line that is pre-stretched to improve strength and reduce elongation ...