420 spinnaker sheet pre cut to our recommended length from 5mm Robline Sirus 500. A great choice for training. Line: 5mm Sirius 500 by Robline Length: 36 feet(Quantity 1 = 36 foot length) Typically cut from red/silver spool, but exact color may vary ...

29er Trapeze mast spacer. Please note this part is now stainless steel and the mast may require drilling to 10mm to fit.

This is a replacement tiller for the 29er. Slides into the rudder stock and is held in place by a rivet. Class legal and ready to race.

Cunningham and Outhaul Upgrade kit for Laser sailboats. Includes a 6:1 Outhaul and 10:1 Cunningham, all led directly to deck blocks & cleats. Additional purchase creates a mechanical advantage for much smoother operation with less effort. Mounts to...

Class approved fiberglass 29er rudder blade. Slides into existing rudder stock. 29er class approved Manufactured by Ovington Boats

Primary control line for 29er jib assembly, pre cut to our recommended length from the durable 5mm Robline Sirius 500. Line: 5mm Robline Sirius 500 line Length: 19 feet (Quantity 1 = 19 foot length) Typically cut from black/silver spool, but exact color...

The Harken Tiller Extension is a light weight aluminum tiller extension that attaches to most tillers. Available in several lengths to match boat type or preference. All extensions include universal joint and base for mounting on existing tillers. The...

The hounds bracket is the mount for the forestay, jib halyard, and tangs which hold the shrouds. The bracket is riveted to the mast of Club 420, FJ, and V-15 sailboats. Clevis pins and ring dings included Sold without shroud tangs Stainless Steel Zim...

The Tasar Hand Holds mount inside the cockpit and allow both skipper and crew to move in from hiking or roll tacking. Watertight, seals flush to cockpit Made by Harken Width: 5-3/4" (14.6cm) Height: 3-1/2" (9cm) Fastener Size: #10 (5mm)

These fittings attach to each end of a spinnaker/whisker pole. Fits standard 420 and FJ spin poles with 1 inch diameter. Fits most 1 inch outer diameter poles. Includes Metal jaw w/spring. inside Diameter: .9 inches. Zim Part # 20183 / Laser Performance...

Replacement Gooseneck fitting for the Laser® sailboat. The stainless steel gooseneck kit rivets to the lower mast and provides and attachment point for the boom. Not class legal for racing but ideal for training or recreational use. Replacement...

C420 mast step fitting made from stainless steel. Mount this component to the floor of your Club 420 as a place for the mast base to connect. Original Equipment Zim Part # 20026 / Laser Performance Part # 90539 Compatible with both Zim and Laser...

This is a sail bag for rolled Laser sails made by Fast Canvas. It is made using durable, nylon material and has a zipper closure at the end. Keep your rolled sail protected from the elements or during transport. Gray nylon fabric Padded ends with...

Molded bow bumper for the FJ.

This shackle is primarily used to attach the jib halyard block to the mast hounds assembly. Includes Clevis Pin and Ring

29er mainsheet line pre cut from the high performance 7mm Dinghy Sheet XL line to our recommended length for easy upgrade to your rigging. Line: 7mm Dinghy Sheet XL Length: 27 feet