The fine tune stay adjuster provides for a quick and easy way to adjust stay tensions. It greatly reduces the risk of losing the stay when adjusting rig tension. 316 stainless steel Pin - 3/16 inch Increment Length - 5/32 in. Qty. Adjustment Settings -...

Replacement rudder lift stop for Laser sailboats and ILCA dinghies. This stainless steel tang keeps your rudder in place during a capsize and is commonly installed between the two gudgeons, with the tab racing down. Stainless steel Installed in line...

Lower gudgeon for the 29er transom.  Lower and upper gudgeons sold separately Manufactured by Ovington Boats

The vang wedge allows for the appropriate cleating angle for the split lead Tasar vang Newly redesigned in 2009 Made from solid delrin Class legal

40mm Carbo Fiddle Block from Harken. 40mm Fiddle block with a becket Made by Harken ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Vang Floating Block (x1) Sonar Lower...

The cup style mast step is easy to use and and has an oval shaped cup to make raking the mast easy. Simple rotating thumb screw and counter sunk screw in plate to mount to hull. Stainless steel construction Scale enables the sailor to recreate...

Foreguy shockcord for FJ spinnaker pole. Line: 5mm Shockcord Length: 15 feet

FJ centerboard downhaul, pre cut from 6mm shockcord to our recommended length of 3 feet. Helps keep the board in place. Line: 6mm Shockcord Length: 3 feet

Complete mast for 29er. Includes a pair of shrouds and 3 rope halyards. Manufactured by Ovington.    SPECIAL ORDER - Availability and Freight Shipping Information This item is classified as FREIGHT due to weight and/or length and is a...

Cunningham line for the Vanguard 15 sailboats, pre cut to our recommended length from a durable 5mm line for great performance. Line: 5mm Sirius 500 by Robline Length: 4 feet Typically cut from green / silver spool but exact color may vary Looking for...

Foreguy shockcord for 420 spinnaker set up pre cut to a recommended length from durable 5mm shockcord. Line: 5mm Shockcord Length: 8 feet

Replacement lower vang block for Laser® sailboats and ILCA dinghies. This 'jam' style block has a cleat for securing your vang line in the older 3:1 (sometimes called 'classic') vang assembly found on older boats. Not class legal for racing...

The Tasar Vang Tang mounts to the bottom of the lower mast section and accommodates two mounting locations for the vang blocks. Made of Stainless Steel Width: 44.5mm (1.75") Height: 38mm (1.5") Upper Tang Width: 19mm (.75") Lower Tang Width: 22mm (...

Shockcord retainer for 420 trapeze wire assembly. Secure ends to each trapeze handle, and run around the mast. Line: 5mm Shockcord Length: 11 fee

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

6" inspection port from Beckson that allows you to gain access to the interior of the boat. The Beckson Screw-Out Plate incorporates a self-aligning center and an innovative gasket to assure a watertight seal. A patented back-up sealing wall leaves the...