Set of hiking straps for the 29er. Set of two straps, sewn in rear, loop on other end Length: 61 inches each Padded for comfort Made by Fast Canvas

Made from a lightweight yarn, these telltales are great to help with correct sail trim. Includes adhesive patches for installation on your sails. 100% wool yarn Adhesive application discs Resists hang ups and sticking 8" long Includes 7 Green and...

This mast up, mooring style Sunfish Deck Cover fits snugly below the rub rail of the hull to seal out dirt and water. This cover is installed with the mast up and the spars and sail down. This cover is held on by an elastic cord in the hem of the cover;...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.. Height (mm)22 mm Height (in) 7/8 in Length...

These racing-style sprit pole ends are tougher for increased halyard tension. They fit into both ends of any 27mm BlackGold sprit pole. Fits all 27mm racing sprits Size based on OUTER DIAMETER of sprit pole Standard on BlackGold sprit

This attaches to the mast, creating an attachment point for the lower vang block. 1/4" Round Original Equipment Used on Sloop Mast 1/4 Round Vang Bail Zim Part # 20213 / Laser Performance Part # 90406 Compatible with both Zim and Laser...

A urethane coated polyester 420 Deck Cover designed to be used with the mast up. The 420 cover does not go over the boom, but does have tabs for tenting the cover using your main halyard. Polyester fabric is waterproof and breathable. Mast up, boom...

1/4 turn key style drain plug by RWO.  If your existing drain plug housing does not have threads, this is the drain plug you want to buy. If your housing has threads, please take a look at our other drain plug offerings. 1/4 turn design - not a...

Aluminum rudder head for Club 420 sailboat. Made by Zim but also compatible with some Laser Performance 420s. Includer2:1 rudder downhaul, pivot bolt, and rudder leash. Standard on all new Zim 420 sailboats. Replacement for Laser Performance Part #...

Outhaul line for the FJ sailboat, pre cut to our recommended length from a durable and low stretch line. Line: 5mm Robline Sirius 500 Length: 10 feet (Quantity 1 = 10 foot length) Typically cut from Silver/Blue color spool, but color may vary Looking...

Spinnaker Throat fitting the 29er deck. Mounting hardware not included Manufactured by Ovington Boats

Grabrail tube end plug for the 29er.  28mm spec Manufactured by Ovington Boats

Quickly and securely attach your outhaul to the clew of the sail. 16mm Harken ball bearing block and captive-locking shackle ensure smooth action and no unwanted releases! Lowers friction Speeds up the rigging process Securely fastens to sail

Shockcord for 420 spinnaker bag to help keep it in place during launch and retrieval. Line: 5mm Shockcord Length: 5 feet

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees. Add to a standard Harken cam cleat (not included). ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat...

Auto-bailer system for the Tasar. Auto bailer, elvstrom, 50023, FS# 66765 - Super Max Bailer, TSR702