Keelboat Parts

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: Lightning...

Endstops absorb shock loads and prevent damage to the car. Kits include endstops, Loctite, and 2 slug mounts. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: Viper 640 Boom...

When end controls are not used, add endstops to absorb shock loads. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: Sonar Main Traveler Track Endstops (x1)

Endstops absorb shock loads. Use the built-in groove to deadend 2:1 control line. Sold in pairs. Fasteners not included.

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 3807 track mounts to mast using a unique slug system that allows mast-up installation. ONE DESIGN APPLICATIONS This fitting is commonly used and/or...

MKIV furling systems are strong, lightweight and aerodynamic, with the performance and features Harken is known for. Longevity, ease of use, and simplicity of installation are crucial components of the design. ONE DESIGN APPLICATIONS This fitting is...

Small Boat underdeck furling units are ideal for sportboats and daysailers from 4.8 m to 9 m (16 to 30 ft). The drum is located beneath the deck, lowering the tack height for maximized sail area. An optional hoistable ball bearing halyard swivel can be...

This optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast...

Harken Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic and 375 X-Treme Angle Fairlead.

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. ONE DESIGN APPLICATIONS This fitting is commonly used...

Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. Kit includes hardcoat-anodized 468 aluminum Micro Cam-Matic and 476 X-treme Angle Fairlead. ONE DESIGN APPLICATIONS This fitting is commonly used and/or...

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even underhigh loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The 144 is the standard configuration with a tall arm...

Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Sheave Ø (mm) 22 mm ...

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J105...