Keep your gear dry and secure with a new 10L Dry Roll-Top Bag from Ronstan. Fully welded construction ensures a water-tight seal to the main bag compartments and water-resistant zippers protect the outer pockets from rain or spray. Includes window so you...

The standard boom block is mounted to the mid point of the ILCA boom. Pass your mainsheet up from your mainsheet block, through the boom block, and then aft to the boom block with becket to complete your rigging. Attaches to the boom with the stainless...

The boom block with becket is attached to the aft end of the ILCA boom. Pass your mainsheet through the block, down to the traveler block, and back up to secure to the becket. This is the latest ball bearing version from Harken as included on all new...

Complete race spec Cunningham and Outhaul Kit for ILCA dinghes. Assembled using top end Harken hardware, the kit includes new, lightweight Harken airblocks, Dynemma SK78 primary lines, and Dinghy Control secondary lines. Cunningham is rigged as a cascade...

Replacement gudgeon for the ILCA dinghy and Laser sailboat. Two of these are mounted on the transom of the boat and used for attaching the rudder head. Installs with 4 screws (not included). Sold individually and made from a heavy duty plastic for long...

32mm eye strap for ILCA dinghies.

Complete autobailer assembly for the ILCA dinghy with bailer plate, chute door, bung, and screw. This is a class legal bailer with ILCA stamp on body of the bailer, and found on new production boats. Designed to be a direct replacement part for existing...

Replacement autobailer bung for the ILCA autobailer assembly. This bung attaches to the rod that controls the bailer chute door. Pull it forward to open the bailer, push it shut to keep water out.

Replacement o-rings for the ILCA autobailer assembly. Available in a convenient 2 pack.

Complete Deck Cleat Plate assembly with Harken cleats and fairleads. Attaches to the ILCA dinghy deck with two screws and used for cleating your outhaul and cunningham lines that run back from the deck blocks mounted behind the mast.

The Deck Cleat Plate is a replacement base for the deck cleat assembly on all ILCA dinghies. This plate does not include cleats or fairleads.

The deck blocks plate is mounted just aft of the ILCA mast step and is a mounting point for two turning blocks for your outhaul and cunningham lines. This is the complete deck blocks plate assembly includes two Harken 16mm air blocks and is standard on...

The deck blocks plate is mounted just aft of the ILCA mast step and is a mounting point for two turning blocks for your outhaul and cunningham lines. This is the plate only, handly for replacing an old plate or for upgrading with your own favorite blocks.

Standard aluminum fairlead for the ILCA dinghy traveler. Attach one on each side of the transom deck.

The Bow Eye Fairlead is mounted on the bow of the ILCA dinghy and serves as a tie down point or place to attach your daggerboard retaining line.

Replacement base assembly for the Harken ILCA / Laser vang assembly. Stainless steel with integrated cleat and turning points. Made by Harken ILCA Class Approved