General Parts

Take care of your sails! The Rooster Sail Tidy will keep your sail secure without needing to crush it with ties or tape. This is the 'Small' size version that is suitable for small dinghy main sails. 15cm X 27cm

Standard horn cleat from Ronstan. 8 inch overall length designed for a max rope diameter of 3/8 inches. Made from a heavy duty UV stabalized nylon for long life and durability.

Standard horn cleat from Ronstan. 6-1/2 inch overall length designed for a max rope diameter of 5/16 inches. Made from a heavy duty UV stabalized nylon for long life and durability.

These 9" digital sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any reason...

These 9" digital sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any reason...

These 12" digital sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any reason...

The professional model tension gauges will provide an increase in accuracy and convenience of use when compared to Loos & Co.'s standard gauges. The gauge may be hooked on wire and will remain in position while the tension is adjusted.

These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Ball bearing grip that efficiently transmits power into the winch. All handles fit international standard winch sockets.

Bring your sailing experience to a new level! Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. Feature precise balance – Olympic Boat Carbon...

The Hawk is lightweight with a balanced arm and a "V" jewel bearing surface. The vane is made of super tough, glass-filled Nylon 12, for improved rigidity, durability, and UV resistance over similar looking polycarbonate versions on the market. It is all...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Traveler...

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic line, these small, compact blocks have very high working loads for safe, easy trimming. The 40 mm fiddle is an excellent...

The 384 traveler block features high-load composite bearings to handle wire and high-strength line. Use with the 382 Radial Traveler car and other Small Boat cars to configure a radial vang. Do not use as mainsheet traveler. ONE DESIGN...

Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes Sheave: 1 1/2 in Weight: 3 oz Shackle pin: 1/4 in Maximum wire: 3 mm Maximum line: 3/16 in Maximum working load: 1500 lb Breaking load: 3000...

Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Sheave: 1 in Weight: 1.25 oz Shackle pin: 3/16 in Maximum wire: 2 mm Maximum line: 5/32 in Maximum working load: 1000 lb Breaking load: 2000...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. The 382 Radial Traveler car has a curved ball race to fit curved track—perfect for radial vangs on boats like the Star. For...