General Parts

Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Use with Harken 241 cam base. A (mm)32 mm A (in)1 1/4 in B (mm)38 mm B (in)1 1/2 in Fasteners (mm)5 RH...

Stamped shackles are used on most small boat blocks and are appropriate for low loads. This shackle has a 6 mm / 1/4 inch pin with a ring for easy attachment. For higher loads, select forged and high-resistance shackles instead. Shackle pin: (mm)6...

The makers of McLube Lubricants have added a Teflon finished, citrus based hull polish for dinghies! 16oz bottle Made by McLube

The Harken Swivel Cam Cleat is a simple swivel base for main and jib sheets on small sailboats. Includes a swivel base, bullseye fairlead, and standard Harken cam cleat. The base rotates 360 degrees making it easy to cleat and un-cleat from any angle...

This strong alloy clam ('jam') cleat is perfect for a variety of applications from halyards to travelers to control lines. Integrated fairlead guides line into cleat Mounts easily to flat or curved surfaces Suitable for use with 3mm to 6mm lines...

29mm Bullet Block Single with Swivel from Harken. 29mm Single Swivel Block

Wire fairleads maintain a low profile while holding the line close to the cleat.. Height (mm)32 mm Height (in)1 1/4 in Length (mm)65 mm Length (in)2 9/16 in Width (mm)32 mm Width (in)1 1/4 in Weight (g)14 g Weight (oz)0.5 oz Fastener spacing (mm)38 mm...

29mm 90 Degree Traveler Blocks from Harken. 29mm Two single blocks at 90 angle for use with traveler applications Made by Harken

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. This is a great cleat for spinnaker sheets on smaller sailboats. Notched cutout on port side of cleat. Lightweight Aluminum construction Mounts easily to deck Notched...

This is a trapeze cleat for a spinnaker and trapeze rigged 420. The integrated block allows for additional purchase. This cleat provides a quick and solid lock that is easy to release, making it the preferred choice for adjusting trapeze lines. ...

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

Large stainless eyestrap from Harken. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Traveler Block Eyestrap (x2)    

57mm Single Swivel Block from Harken. 57mm Single Block

40mm Carbo Fiddle Block from Harken. 40mm Fiddle block with a becket Made by Harken ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Vang Floating Block (x1) Sonar Lower...

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees. Add to a standard Harken cam cleat (not included). ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat...