General Parts

This optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast...

Harken Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. The hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing...

Harken Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without...

Harken Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without...

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Sheave: 40 mm / 1 9/16 in...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)16 mm Height (in) 5/8 in Length (mm)48 mm Length (in)1 7/8 in Width (mm)24 mm Width (in)...

57mm Carbo Ratchet block with standard Harken cam. 57mm ratchet block Standard Harken cam cleat Made by Harken

22mm Micro Traveler Block from Harken. 22mm Two standard single blocks, linked for use on a traveler or similar application Made by Harken ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. This micro riser has a 15 degree angle. Height (mm)19 mm Height (in) 3/4 in Length (mm)48 mm Length...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race. Stainless Steel Construction Sheave: 16 mmS / 5/8...

Padded Blade Bag for 29er, 49er, and Tasar Sailboats. A custom bag that fits 29er, 49er, and Tasar foils safely and securely. Full length zippered from pouch with mesh to store lines and accessories. Individual padded pockets for a rudder and...

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Sheave: 57 mm / 2 1/4 in...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.. Height (mm)22 mm Height (in) 7/8 in Length...

T2™ blocks come in single and double configurations and can be tied, spliced, or lashed to almost anything. T2 doubles feature composite line guides that are integrated into the block head. They prevent the block from capsizing by pushing the...

Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Sheav: 29 mm / 1 1/8 in Length:...