General Parts

A neat, compact alloy cleat. Manufactured from aluminium for light weight and durable performance; Aluminium cleats are highly successful in providing a complete answer to rope burn. They are unaffected by the heat generated by a rope surging back...

This aluminum Clam Cleat includes a becket that holds the end of the rope under the cleat to allow rigging with a 2:1 advantage. Becket also holds shockcord & bungee.  No need for extra parts. Ideal for Cunningham adjustment on small boats, or...

This cam cleat saddle is used to keep the uncleated line within close proximity to the cleat, facilitating recleating. Made from grade 316 stainless steel and suitable for large Ronstan T-Cleat and C-Cleat cam cleats. Grade 316 stainless steel Weight -...

This Ronstan cam cleat fairlead is easily fitted to existing T-Cleat and C-Cleat cam cleats. Allows precise cleating and release from any lead angle with lower entry efforts for off-centre cleating. Made from a tough, abrasion resistant composite...

The Ronstan C-Cleat large cam cleat is the product of intensive development efforts, producing a range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load...

Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy gauge alloy for stiffness and minimum distortion under load. Great for sheet leads...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

This plastic cleat is suitable for low-load uses. A simple and economical cleat. Total Length: 3 1/4" Hole Center to Hole Center: 2 5/8" Width:  11/16" Fits Ropes 1/8" - 1/4" Durable Nylon construction Mounts easily to flat or rounded surfaces

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. great for Control lines on dinghies and catamarans. Lightweight. Low, snag free profile. Base...

V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system. great for Control lines on dinghies and catamarans. Lightweight. Low, snag free profile. Base...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

The Harken Swivel Cam Cleat is a simple swivel base for main and jib sheets on small sailboats. Includes a swivel base, bullseye fairlead, and standard Harken cam cleat. The base rotates 360 degrees making it easy to cleat and un-cleat from any angle...

This strong alloy clam ('jam') cleat is perfect for a variety of applications from halyards to travelers to control lines. Integrated fairlead guides line into cleat Mounts easily to flat or curved surfaces Suitable for use with 3mm to 6mm lines...

Wire fairleads maintain a low profile while holding the line close to the cleat.. Height (mm)32 mm Height (in)1 1/4 in Length (mm)65 mm Length (in)2 9/16 in Width (mm)32 mm Width (in)1 1/4 in Weight (g)14 g Weight (oz)0.5 oz Fastener spacing (mm)38 mm...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. This is a great cleat for spinnaker sheets on smaller sailboats. Notched cutout on port side of cleat. Lightweight Aluminum construction Mounts easily to deck Notched...