RS Sailing Parts

Mainsheet Hoop Kit for the RS Quest. Mainsheet Hoops are no longer used on new RS Quests, they have been replaced by a traveler system.

Selden Sliding Eye Heavy Duty Eyestraps. Two of these eyestraps are used on the RS Quest Boom to secure the 40mm boom blocks. Attach to the boom using 2x rivets for each eyestrap. The part numbers for the boom blocks and rivets are 404-101-02R and...

Dacron Mainsail for the RS Quest. Includes battens, sail bag and sail numbers (digital 8 format)

Wear surface at the stern of the RS Quest hull. Along with the hull rail handles helps to reduce wear on the hull. Attach using two screws. The part numbers for the hull rail handles and screws are QUE-HF-307 and FIX-S8-C03, respectively.

Hook casting for securing the Jib Tack on the RS Quest. Connects to the Tack Plate using a 20mm clevis pin. The part numbers for the tack plate and 20mm clevis pin are QUE-HF-104 and ST-O0620, respectively.

Furling Jib Cover for the RS Quest.

Dacron Jib for the RS Quest.

Handles which attach to the leading edge of the chines on the under (water) side of the RS Quest hull and RS Zest Hull. Attach using 2x screws whose part number is FIX-B5-C20. Can be used to help lift the boat when it is upside down. Also provide a wear...

RS Quest Furler Tack Plate. Attachment plate to bridge the gap between the tack bar, the forestay shroud lever, and the jib tack hook. Attaches using 1x 20mm clevis pin and 2x 10mm clevis pins. The parts numbers for the tack bar, shroud lever, tack hook,...

Top swivel for the RS Quest Forestay.

Forestay for the RS Quest. Comes with Jib Attachment Swivel and Forestay top strop. Excludes top swivel.

RS Quest Foredeck Pins. Attach using 2x screws, whose part number is FIX-B5-C12.

Transom drain assembly for the RS Quest. Flap allows water to freely drain out the transom.

Breathable Polycotton Deck/Top Cover for the QS Quest.

Rubbing plate/gasket retainer for the RS Quest and RS Zest centerboard case. Used on the under (water) side of the RS Quest centerboard case to secure the centerboard gasket. Helps to stabilize the daggerboard. Secured outward of the centerboard gasket...

Gasket between the hull and the rubbing plate on the under (water) side of the RS Quest and RS Zest centerboard case. Use on on each side of the case opening. Secured under the rubbing plate using 6x screws. Made of 2000 sail cloth. Also used on the RS...