RS Sailing Parts

Ratcheting Mainsheet Block and Base for the RS Quest. Includes 60mm Selden Ratcheting Block, D Shackle, spring, 3x screws, and eyestrap. The part numbers for the block, shackle, spring, screws, and eyestraps are P406301, A-621105, R1813, FIX-B5-C20, and...

Wear surface at the stern of the RS Quest hull. Along with the hull rail handles helps to reduce wear on the hull. Attach using two screws. The part numbers for the hull rail handles and screws are QUE-HF-307 and FIX-S8-C03, respectively.

RS Quest Foredeck Pins. Attach using 2x screws, whose part number is FIX-B5-C12.

Centerboard friction tube for the RS Quest. Prevents the centreboard from come up when sailing. Does not include plate or screws, whose part numbers are A4099 and FIX-S10-P02, respectively. Also used on the RS200, RS400, and RS500.

Thru-deck line bushing used on the RS Quest Bow and Transom.

Seasure low saddle eyestrap.Used on the RS700 mast to attach trapeze wires.

Vang Attachment Shackle for the RS Feva. Attaches to the mast using a strop.

Tack Bar Saddles for the RS Feva, sold as a pair. Used in mounting the RS Feva Tack Bar, whose part number is FEV-HF-101.

Tack Bar for the RS Feva. Used to secure the tack of the RS Feva Jib. Mounted using 2x M8 screws, 2x M6 screws, 2x M8 washers, 2x M5 washers, and the tack bar saddles. Part numbers for the hardware are: FIX-B8-C25, FIX-B6-B25, FIX-W8-002, FIX-W5-005, and...

Tube at the bow through which the RS Feva Bowsprit extends.

Shroud U Bolt for the RS Feva. Connects the stay adjuster to the hull. Fitted as standard on new boats and can be retro fitted to boats not already fitted with U bolts. The UBolt also serves as the mounting point for the spinnaker sheet block, whose part...

Upper Daggerboard Surround Nylon for the RS Feva. Fitted onto top of daggerboard case using six screws, whose part number is FIX-B5-C12. Serves to brace/hold the daggerboard in position.

Lower Daggerboard Surround Nylon for the RS Feva. Attached to the bottom of boat using six screws, whose part number is FIX-B5-C12. Serves to brace/hold the daggerboard in position.

Cunningham (Downhaul) Upgrade for the RS Feva.

Mainsail stainless steel clew loop for the RS Feva.

38mm Cam Cleat used for the RS Feva Jib Sheet. Made by Allen Brothers. Works for 4-10mm line diameters. Maximum working load 286lbs.