RS Feva Parts

Mast Collar (Foredeck Level) for the RS Feva.

Mast Collar for the RS Feva. Attached to the mast using two rivets, whose part number is FIX-R48-M12. Collar fits into the aft end of the foredeck, helping to secure the mast.

Foredeck for the RS Feva. Mounts to the hull using six machine screws and six pan screws, whose part numbers are: FIX-S12-P01, and FIX-B8-P40. Further secured by two lateral screws, part number FIX-B8-C25, and two washers, part number FIX-W5-005,...

New style deck cover for the RS Feva, made from Polycotton breathable material.

Upper Daggerboard Surround Nylon for the RS Feva. Fitted onto top of daggerboard case using six screws, whose part number is FIX-B5-C12. Serves to brace/hold the daggerboard in position.

Lower Daggerboard Surround Nylon for the RS Feva. Attached to the bottom of boat using six screws, whose part number is FIX-B5-C12. Serves to brace/hold the daggerboard in position.

The RS Feva Harken Racing Downhaul kit is a 4:1 readymade purchase system comprising 16mm Harken blocks and SK78 pre-spiced Dyneema lines from FSE Robline. This kit comes preassembled to ensure quick and easily fitting.

Cunningham (Downhaul) Upgrade for the RS Feva.

Clew Strap for the RS Feva.

Mainsail stainless steel clew loop for the RS Feva.

38mm Eyestrap used for the RS Feva Jib Sheet. Made by Allen Brothers. Used with A676 cam cleat.

38mm Cam Cleat used for the RS Feva Jib Sheet. Made by Allen Brothers. Works for 4-10mm line diameters. Maximum working load 286lbs.

28mm Ball Bearing Cam Cleat. Used for the RS Feva Spinnaker Halyard. Made by Allen Brothers. Works for 2-6mm line diameters. Maximum working load 220 lbs.

Inbound end cap for the RS Feva Bow Sprit. Made of plastic, pushes in, and fits a 38mm tube. Also used on RS Vareo Bowsprit.

Complete Bow Sprit for the RS Feva. Fully rigged including control lines and end caps.

Forged Bow Shackle with 5mm pin by Allen Brothers. Used on the RS Feva.