Pre Cut Line

The Laser cunningham spectra line, or cunningham secondary, is used on the top part of a racing cunningham system and passes through the grommet in the sail. Intended for use on Laser sailboats with 'race' or 'upgraded' hardware including deck blocks and...

Spectra portion of the upgraded Laser outhaul set up. This section is used at the aft end of the boom. Pre cut to our recommended length for easy upgrade or replacement. Line: 3mm Spectra Length: 10 feet  

Vang Line for classic rigged Lasers (basic 3:1 purchase system), pre cut to our recommened length of 10 feet. Line: 5mm Robline Sirius 500 Length: 10 Feet (Quantity 1 = 10 foot length) Typically cut from red/silver spool, but exact color may vary ...

Laser cunningham line for classic rigged boats with origional deck hardware. Pre cut to the recommended 10 foot length for easy upgrade or replacement on your Laser sailboat. Line: 5mm Robline Sirius Length: 10 feet (Quantity 1 = 10 foot section of...

Outhaul line for classic rigged Lasers without upgraded deck hardware. This line is cleated using the clam cleat on the boom. Line: 5mm Robline Sirius 500 Length: 10 feet (Quantity 1 = 10 foot length) Typically cut from Silver/Blue color spool, but...

Bzz is a superb, low stretch line with a great feel in the hand, and makes a great Laser mainsheet line. Pre cut to our recommended length. Line: 8mm Bzz Line Length: 44 feet

7mm Rooster Polilite is the gold standard for Laser mainsheet lines. Order your new mainsheet pre cut to the recommended length from this high stretch and low tangle mainsheet line. One of our best sellers and the perfect all around mainsheet line for...

Laser mainsheet pre cut from 7mm Bzz line. This is one of our favorite line options, with low stretch and a great feel in the hand. Line: 7mm Bzz Length: 44 Feet

6mm Rooster Laser Mainsheet pre cut to our recommended length of 44 feet. This is one of our most popular mainsheet options for light air sailing. Line: 6mm Rooster Length: 44 feet

The Laser daggerboard bungee helps keep your board in place while sailing. Pre cut to our recommened length for easy upgrade or replacement. Line: 8mm Shockcord Length: 8 Feet

Use this pre cut section of shockcord to help keep your Laser hiking strap up and off the cockpit floor. Line: 6mm Shockcord Length: 3 Feet

The Laser daggerboard clip line is used to attach a plastic clip from the daggerboard bungee to the daggerboard itself. Line: 4mm Robline Sirius 500 Length: 2 Feet (Quantity 1 = 2 Foot Section of Line) Typically cut from Blue/Silver spool but color may...

Keep your Laser sailboat secure to the dolly or dock with a floating bowline, pre cut to our recommended length of 10 feet. Line: 8mm PolyPro Length: 10 Feet

Downhaul line for the Laser rudder, pre-cut from 4mm Robline Sirius line for your convenience to 4 feet. Line: 4mm Robline Sirius 500 Length: 4 feet (Quantity 1 = 4 foot section of line) Typically cut from Red/Silver spool but color may vary Looking...

The Laser Outhaul Dangle Line is designed to secure your outhaul blocks around the lower mast section at the gooseneck fitting. Use on boats with upgraded Outhual and Cunningham systems. Line: 4mm Robline Sirius 500 Length: 2 feet (Quantity 1 = 2 foot...

Laser mast tie down line. Use this little section of line to prevent your mast from coming out in the event of capsize, securing it around the deck blocks and up over the vang tang. Helps avoid expensive repairs! Line: 3mm Robline Dinghy Control Color:...