Hobie Wave

A standard 3/16 inch by 3/8 inch stainless steel pop rivet from Hobie Cat. 3/16 inch diameter rivet. 3/8 inch long. Stainless steel construction.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Many sailors prefer lacing their trampoline with shock cord. This kit includes three pieces of 3/8" nylon covered black coated nylon shockcord and 12 clamping rings. Fits the Hobie 14, Hobie 16, and Hobie 18 with older style single grommeted trampolines...

Safety lanyard for Hobie Getaway wing leg. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Batten that is 67 1/2", not tapered. Availability of the correct batten has often been a problem. The various models of Hobie Cats all use different batten and taper lengths. In earlier years, each model Hobie used a different color batten. The battens...

Large size Clevis Ring from Hobie Cat. Works with most clevis pins. Large size stainless steel clevis ring for most clevis pins. Hobie Cat # 20860000.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat...

This mast horn cleat is a replacement for the downhaul or halyard cleat on both the Hobie 14 and Hobie 16. Attach with rivets or screws (not included). Replacement downhaul or halyard cleat Recommended for Hobie 14 and Hobie 16 Does not include hardware...

The standard downhaul "S" hook for the Hobie Wave as found on all new boats. This hoot is also used in the Hobie Tandem Island mainsheet system. Stainless Steel S Hook Hobie Part Number 38670011 Compatibility: Hobie Wave Downhaul Hobie...

SCREW #10 X 1/2 PHSMS-P TF-16 from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

1/4 inch diameter clevis pin with a 5/8 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 1/4 in (6.5 mm) Pin Grip Length (B) is 5/8 in (16 mm) Sold...

Retaining clip for the Hobie Wave, Hobie Getaway, Hobie Bravo, and Hobie 16 rudder assemblies. Stainless steel Sold individually RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Batten cap for mainsail luff tip. Release the batten tension whenever you store your sails. This will prolong the life of your sails. Luff caps and adjustable leach caps are made of high strength, ultra-violet tolerant Delrin. No knots to tie or untie...

SCREW 1/4-20 X 5/8 PHMS-P SS from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

1/4-20 HX Nylock nut from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Lower pintle assembly for Hobie Wave sailboat. Original Equipment on all Hobie Wave sailboats. Lower pintle should be mounted with four (4) screws. Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer. Hobie Cat Part #...

Stainless steel S hook for the Hobie Wave mainsheet. Makes it easy to attach mainsheet to sail and standard on all new boats. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Retainer clip for Hobie Cat tiller connector assembly. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts