Cleats

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.. Height (mm)22 mm Height (in) 7/8 in Length...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees. Add to a standard Harken cam cleat (not included). ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. Kit includes lightweight, fiber-reinforced 471 Carbo Cam and 476 Extreme Angle fairlead. Includes cam 471 Includes fairlead 476 Weight (g)47 g Weight...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Aluminum construction Works with line diameters...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. This is a great cleat for spinnaker sheets on smaller sailboats. Cut out located on starboard side of cleat. Lightweight Aluminum construction Mounts easily to deck...

Lightweight, fiber-reinforced fairleads feature stainless wear guards for long life and are available in various colors for color-coding your cams. Height above cam (in) 5/8 in Height above cam (mm)16 mm Length (mm)56 mm Length (in)2 3/16 in Width...

The ClamCleat CL236 roller fairlead allows ropes to enter the cleat from above and has an integrated roller. Available in silver stove enamel finish for a cost effective, high quality coating. Jam cleat with integrated roller Made of Aluminum...

Wedge kits and risers are available to improve the angle of your cams. Under deck shims are included with angled risers and wedges for easy mounting. Height (mm)28 mm Height (in)1 in Length (mm)65 mm Length (in)2 9/16 in Width (mm)32 mm Width (in)1 1/4...

Lightweight, fiber-reinforced flairleads feature stainless wearguards for long life and are available in various colors for color-coding your cams. Height above cam (in) 7/16 in Height above cam (mm)11 mm Length (mm)41 mm Length (in)1 5/8 in Width...

Wedge kits and risers are available to improve the angle of your cams. Under deck shims are included with angled risers and wedges for easy mounting. Length (mm)48 mm Length (in)1 7/8 in Width (mm)24 mm Width (in) 15/16 in Weight (g)5 g Weight (oz)0.16...

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

Wedge kits and risers are available to improve the angle of your cams. Under deck shims are included with angled risers and wedges for easy mounting. Height (mm)25 mm Height (in)1 in Length (mm)65 mm Length (in)2 9/16 in Width (mm)32 mm Width (in)1 1/4...

Plastic wedge for standard Harken clam cleats. Official Harken part.

Swivel cleat bases permit easy cleating and releasing from any angle. Sheave can be relocated up or down to allow the control line to feed from below. Series 20 ball bearing sheave Small "T-Cleat" "Fast Track" fairlead