Cleats

The Harken Swivel Cam Cleat is a simple swivel base for main and jib sheets on small sailboats. Includes a swivel base, bullseye fairlead, and standard Harken cam cleat. The base rotates 360 degrees making it easy to cleat and un-cleat from any angle...

Wire fairleads maintain a low profile while holding the line close to the cleat.. Height (mm)32 mm Height (in)1 1/4 in Length (mm)65 mm Length (in)2 9/16 in Width (mm)32 mm Width (in)1 1/4 in Weight (g)14 g Weight (oz)0.5 oz Fastener spacing (mm)38 mm...

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees. Add to a standard Harken cam cleat (not included). ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. Kit includes lightweight, fiber-reinforced 471 Carbo Cam and 476 Extreme Angle fairlead. Includes cam 471 Includes fairlead 476 Weight (g)47 g Weight...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Aluminum construction Works with line diameters...

Lightweight, fiber-reinforced fairleads feature stainless wear guards for long life and are available in various colors for color-coding your cams. Height above cam (in) 5/8 in Height above cam (mm)16 mm Length (mm)56 mm Length (in)2 3/16 in Width...

Lightweight, fiber-reinforced flairleads feature stainless wearguards for long life and are available in various colors for color-coding your cams. Height above cam (in) 7/16 in Height above cam (mm)11 mm Length (mm)41 mm Length (in)1 5/8 in Width...

Wedge kits and risers are available to improve the angle of your cams. Under deck shims are included with angled risers and wedges for easy mounting. Length (mm)48 mm Length (in)1 7/8 in Width (mm)24 mm Width (in) 15/16 in Weight (g)5 g Weight (oz)0.16...

Harken cam cleats utilize a system of multiple rows of ballbearings allowing the line to be cleated by snapping down rather than drawing through. The cams are design to provide maximum holding power without destroying the line. This includes smooth...

Plastic wedge for standard Harken clam cleats. Official Harken part.

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)16 mm Height (in) 5/8 in Length (mm)48 mm Length (in)1 7/8 in Width (mm)24 mm Width (in)...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. This micro riser has a 15 degree angle. Height (mm)19 mm Height (in) 3/4 in Length (mm)48 mm Length...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.. Height (mm)22 mm Height (in) 7/8 in Length...

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The low profile 205 is used when installation is at...