This is a high performance J/24 Main Halyard, designed to be cleated on the mast and tied to the mainsail (to reduce weight), with a reeving eye on the tail for easy installation. Some sailors prefer this configuration to save weight aloft vs having a...

Our J/22 2:1 Jib Sheets are designed to be tied to to the eye on the jib lead car, run through the clew of the sail, back through the jib lead block and back to the winch. This is a set of two sheets (2), each with an approximate working length of 23...

Rooster toestraps use a unique rubber compound that has a very high coefficeint of friction, whilst also being light and durable. Our new Pro Plus Range has this rubber added to the bottom of our padded toestrap. Rooster Pro Plus Padded straps are super...

Upgrade your Sunfish and hit the racecourse with our Sunfish Racing Halyard. This main halyard is built from Dyneema Amsteel, a super low stretch and high strength line, and expertly finished with whips at each end by our Rigging Department...

This is the classic 3 Loop Bridle for Sunfish sailboats. It is made from wire with loops at each end plus a loop in the center for attaching your mainsheet, expertly assembled by our Rigging Department and finished with heat shrink wrap. Installs to the...

Specially made by the West Coast Sailing Rigging Department for the top Optimist competitor, this is the ultimate mainsheet block and clip. Made from a Harken 40mm Carbo block (H2650), custom Samson Amsteel pendant reinforced with cover at the block head...

The Opti Tapered Vang is the ultimate vang upgrade for the Optimist racer. Replace your wire vang with this all line option which includes a section of 1.7mm Amsteel with loops on each end plus a section of 5mm Dinghy Control line for cleating. Simply...

The Laser / ILCA Outhaul Mast Loop w/ Block (Double Block) features two Harken T18 block spliced to Dyneema with an eye in the other end. Simply wrap the line around the mast and past the blocks through the eye - easy to use whether the sail is up or...

Upgrade your Laser / ILCA cunningham system with our pro spliced cunningham primary. Our Rigging Department splices a Harken Micro Single Block to the end of Amsteel and then splice a loop just beyond it. Slide the loop over the bottom of your mast...

Updated Laser / ILCA Clew Inhauler from the West Coast Sailing Rig Shop. The ultimate easy on/off clew inhaul solution features a closed loop for luggage tagging on your boom cleat and a loop and stopper ball closure. After connecting the loop to your...

This Laser / ILCA class legal set up is the best way to control your daggerboard. Easy on/off attachment to the blade with an ultra-lightweight snap shackle. Eliminates daggerboard creep with sailing upwind by applying maximum pressure vertically rather...

Modeled after the standard wire jib halyard that comes with the Club 420, we use high quality 7x19 wire and nicropress a Harken Micro Single with Becket to the 'working' end. For attachment to the sail, we upgrade the standard shackle to a Wichard...

Updated 2020+ steering handle for Adventure Island and Tandem Island kayaks. Also works on Hobie Pro Angler 360 kayaks. HCC Part # 88991320. This is an update for now discontinued part # 88991301. Compatible with all Hobie Adventure Island and...

This is the original Hobie Mirage Drive stainless rudder mount for early Mirage kayaks. Stainless steel HCC Part #81350001 RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

The Rooster RS Aero Carbon Tiller Extension - 1.1m long (22mm diameter tube). This extension comes complete with a RWO Omniflex rubber universal joint. This joint is easily replaced if you have a different fitting on your tiller  The length...

The Hobie Rectangular Hatch Drop-In Bucket is a convenient storage bucket designed to fit into the standard Hobie Rectangular Twist and Seal Hatch found on many Hobie kayaks. Offers convenient storage and organization Compatible with the Hobie...