WASHER 5/16 X 1/2 X .030 NYLON from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Diameter: 5/16". Width: 11/16". Length: 1 1/4".

Highest quality aircraft stainless wire coated with UV tolerant vinyl coating for all of Hobie's wire products. Molded nylon handles are installed at the right place for easy in and out maneuvering. Includes a pair (2 wires) of black coated wires for...

COTTER PIN 1/16 x 1/2 SS from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

For the integrated track crossbar on the Hobie 16! Standard equipment as of late 2005. This jib traveler is constructed of Zytel. Zytel is made of glass reinforced nylon which results in a very strong material. This resists fatigue and impact failure...

Hog rings can be crimped to secure two pieces of line or a single line in a loop. Commonly use for making shockcord loops on small sailboats. 3/8 inch stainless steel hog ring. Works for up to 3/16 inch or 5 mm diameter line.

Track used for the jib sheet blocks on the Hobie 16. Works on port or starboard side of front crossbar and installed with rivets. 6 hole track Requires (6) 3/16 X 3/8" CSK Rivets (Part Number 8010201) Also used as a Hobie 18 jib track (port or...

RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Large size Clevis Ring from Hobie Cat. Works with most clevis pins. Large size stainless steel clevis ring for most clevis pins. Hobie Cat # 20860000.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat...

Replacement jib hank with screw from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Standard Hobie Cat sailcloth 14 inch sail number. #8 in black with sticky back adhesive. Class legal for all Hobie Cat racing and standard on new sails. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Stainless Detent style pin with captive ball at one end and ring at the other. 2 inch length by 1/4 inch diameter. Commonly used for the Hobie Wave mast step pin. Stainless steel Detent style pin 2 inch length by 1/4 inch diameter SOLD...

The 10 hole forestay adjuster mades dialing in the rake of your Hobie Cat mast easy. Works on all Hobie Cat catamarans that that allow mast rake, such as the Hobie 14, Hobie 16, Hobie 17, and Hobie 18.   RESOURCES & SUPPORT Hobie Cat Parts...

Spacer. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

This mast horn cleat is a replacement for the downhaul or halyard cleat on both the Hobie 14 and Hobie 16. Attach with rivets or screws (not included). Replacement downhaul or halyard cleat Recommended for Hobie 14 and Hobie 16 Does not include hardware...

4.7 mm bow shackle from Hobie Cat with pin.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts