Rudder Blade for the RS Quest. Blade only, purchase blade top and blade bottom tip separately. The part numbers for the blade top and bottom tip are RSM-FO-912 and RSM-FO-909, respectively.

Reefing hook used to secure the tack of the RS Quest Mainsail. Used in reefing the mainsail. Attaches to the gooseneck whose part number is 509-081-01.

Outboard Motor Mounting Plate for the RS Quest. Made by RS Sailing. Part Number QUE-UA-103

Pair of mast head shims and 8 rivets used to secure them to the mast for the RS Quest. Shims serve as the anchor surface for attaching the masthead float brackets, whose part number is RSM-SP-911.

Top Mast (Black) for the RS Quest.

Mast Foot/Plug for the RS Quest. Includes upgraded pivot pin. Connects the bottom of the RS Quest mast to the mast step, whose part number is QUE-HF-200.

Pivot Pin for the RS Quest Mast Step. Use with RS Quest Mast Plug/Foot, whose part number is QUE-SP-904.

Forward Beam Assembly for the RS Quest. Includes mast step. Attaches using 2x screws and caps. The part numbers for the mast step, screws, and caps are QUE-HF-200, FIX-B6-P16, and QUE-FO-901, respectively.

Mast Step for the RS Quest. Attaches to the Beam Assembly using 2x rivets. The part numbers for the Beam Assembly and rivets are QUE-HF-105 and FIX-R64-M18, respectively.

Masthead Float kit for the RS Quest from RS Sailing. Add peace of mind with a mast float to help keep the top of the mast above water in the event of a capsize. Sold Mast Flat Includes mounting brackets 14L Capacity Also works on the RS Cat 16 and RS...

Complete Mast for the RS Quest sailboat. Includes all standard mast fittings. Does not include standing or running rigging (such as halyards, shrouds, forestays, trapeze kits). RS Quest Mast with Fittings No Standing or Running Rigging OEM RS Part...

Kit for upgrading the RS Quest Mainsheet Base to a Swivel Base with cam cleat. The kit includes the 4x screws and cable ties needed to install the upgrade. This kit can also be used on the RS Toura. Instructions for installation

Mounting Plate for the Mainsheet Hoop when this is installed on the RS Quest. Two are needed to install the mainsheet hoop. Attach using 3x screws each, whose part number is FIX-B5-C12.

Hoop Blanking Caps for the RS Quest. Used to seal off the holes in the deck when the RS Quest does not have a mainsheet hoop installed. Attach using 2x screws, whose part number is FIX-B5-C12.

Mainsheet Hoop Kit for the RS Quest. Mainsheet Hoops are no longer used on new RS Quests, they have been replaced by a traveler system.

Selden Sliding Eye Heavy Duty Eyestraps. Two of these eyestraps are used on the RS Quest Boom to secure the 40mm boom blocks. Attach to the boom using 2x rivets for each eyestrap. The part numbers for the boom blocks and rivets are 404-101-02R and...