Keelboat Parts

Complete Lower Shroud assembly for the J/24. 1x19 wire (5/32) 316 stainless per class specification with T-Ball Terminal and Open Body Turnbuckle, expertly assembled by the West Coast Sailing Rig Shop. All standing rigging designed to conform with...

Complete Lower Backstay Leg wire for the J/24. 1x19 316 Stainless Wire per class specification with Aircraft Fork and Open Body Turnbuckle, expertly assembled by the West Coast Sailing Rig Shop. All standing rigging designed to conform with J/24 class...

Complete Forestay Wire for the J/24. 3/16 inch wire in 316 stainless per class specification with Aircraft Eye on upper end and Open Body Turnbuckle on lower end, expertly assembled by the West Coast Sailing Rig Shop. All standing rigging designed to...

Make life easier for your bow person with our J/24 Topping Lift/Foreguy strop. Use this dyneema strop to connect your Topping Lift and Foreguy hooks, making it easier to get your spinnaker pole set on quick gybes. We make these from a high performance...

When end controls are not used, add endstops to absorb shock loads. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: Sonar Main Traveler Track Endstops (x1)

Endstops absorb shock loads. Use the built-in groove to deadend 2:1 control line. Sold in pairs. Fasteners not included.

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 3807 track mounts to mast using a unique slug system that allows mast-up installation. ONE DESIGN APPLICATIONS This fitting is commonly used and/or...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic and 375 X-Treme Angle Fairlead.

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. ONE DESIGN APPLICATIONS This fitting is commonly used...

Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degrees to the cleat. Kit includes hardcoat-anodized 468 aluminum Micro Cam-Matic and 476 X-treme Angle Fairlead. ONE DESIGN APPLICATIONS This fitting is commonly used and/or...

Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even underhigh loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The 144 is the standard configuration with a tall arm...

Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Sheave Ø (mm) 22 mm ...

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J105...

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. ONE DESIGN APPLICATIONS This...

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. ONE DESIGN APPLICATIONS This...